Search results

Ditto on the youper stuff (and northern MN), also lots by Devil's Lake, and Wyalusing/Prairie du Chien area. I can only think if I looked more, there'd be lot's more, too! I'd think there'd be lots in Ashland County if you're up for the trip (not sure where in WI you are), but I think there's...

I went to the fuse panel...139/USB charger for the constant 12vdc hookup and 22/image module for the 12 on ignition/accy hookup with the Wolfbox accy wiring kit. I took the stock mirror down and used their dash hookup for that, although I needed to get four 2mmx0.40 pitch screws for the back of...

Where did you pull your power from?

go to unified by bronco later this month to spend a few more days checking it out...

Don't think of action or retribution if you haven't thought of what identifiable and quantifiable (e.g., dollars) damages might be, and then what you'd consider as appropriate compensation. The videos are primary evidence, and should be copied/backed up appropriately and never share the...

We have a '24 Black Diamond. Installed Mabett "running boards". Like 'em as they run the length of the side so you don't have to worry about where you're placing your feet stepping into the vehicle, and they "bolt-clamp" onto the rails and would likely just slide off if loaded (with vehicle...

Got mine "for Xmas", mounting the front cam per the pic. It does stick out a bit, but you can angle it down for off-road, then back to horizontal for street driving. Ive got blue loctitie on the screws and shrink wrap on the connector.

If you buy moth balls: in CA, they come in sealed plastic bags; you'll have to buy a nylon mesh bag to put them in then put the mesh bag under the hood. If you buy them in NV, they'll come double wrapped in a bag, but remove the outer one and the inner one is perforated and you can just put that...

Took me two days on and off to assemble mine...a fun distraction today!!

Not sure what Ford used for their "Loctite" on the factory bolts for this, but even using hand tools I stripped the bolts trying to remove them, so just got the sawzall out to cut & remove them. I still blue Loctite-d all the bolts on hitch install. Also had to notch out the bottom of the bumper...

Costco sells a TypeS dashcam that can run off a USB connection...and sticks to the inside of the windshield with a provided clear plastic sheet that makes it easily removable. Around $120, iirc...

I'd say the 21.7 ave mpg is noteworthy!!!

It's on our '24 Black DIamond, also. THinking it allows for more crush resistance in a crash...?

Has Pug started talking to you? Maybe started to in your dreams? (Men in Black...)...

Set ours up with the Blue Ox tow bars and wiring kit, although the Curt wiring kit looks cleaner. We use a Blue Ox Patriot for braking as we tow any of four vehicles and don't have a permanent tow braking system installed. We also used the RVi battery "adapter" for a positive indication our...

Ditto on Chuck Yarbrough...

A number of years ago was able to take some FS roads north of Big Bear to Lucerne Valley...neat. Also Hemet to Idyllwild to Palm Springs.

What would be nice is a tire shop that does alignments, 'cuz they always like pointing fingers at the other one!

Like the decals, also. Tours like this are awesome; I'm so thankful for ALL the USFS roads that offer both challenges and very rewarding experiences, views and sights!

Recently we were faced with the same cost conundrum: Costco quoted same as Discount Tire, but DT adds install costs. We decided to go with Costco for the first time in 25 years (more later)...and are notably unhappy. Heavy, non-repairable gouges on ALL FOUR alloy rims. Thankfully, they've...