Search results

Right side only. Start with the cargo space floor. Then the trim piece along the cargo door. Then the trim piece across the floor and the seats. Then the trim running down between the door and the right side panel. Then the panel. Here’s the bible video …ignore the left side

Also, just for shits and giggles, try 2A in place of 16. Let’s eliminate as many variables as a cause as possible. Also, given you’ve never see the amp actually power up, you might simply have a doa amp. Contact Teamequip, tell them the situation, and you’re being honest that you’re going to...

I’m writing this for those looking at waiting a year or more for their Bronco. There are cars coming in…cancelled orders…where you might get lucky. Just do a dealer inventory in-transit search by relevant zip codes. Certainly agree with the “idiot” assessment. I’ve had a 4dr 2.3l BadSas 10...

So if I drop in the fusion amp using the cables going into the dummy amp as is, and wire the 6.75 kicker sub using the wires going to the dummy speaker as is, is it Series or Parallel?

Given the fact that you’ve successfully written changes using Forscan, I’m inclined to agree. I would have Forscan write the ACM back to the original as built. Then, I would write in 16 in the 1st 2 characters of the 2nd hex group. Change nothing else. When you click write all, make sure the...

I hate to ask the obvious, but can you walk through exactly the steps you took in the car and the software?

OBDLink EX FORScan OBD Adapter https://a.co/d/7KoiaAP

Yes. I am now running 16 and happy with it. I won’t be truly happy until I lose the 4” pods and got 6”, and trash the 6” shit stock kick panels for 6” kickers . At that point, any significant jump in sound quality after that hits the “diminishing returns” threshold in terms of investment. Not...

I’m not sure that’s correct. When speaking to Kicker tech support yesterday, he said that FORScan changes alters the signal coming out of the ACM into the amp. His recommendation was to rerun the DSP calibration if changes are made using FORScan. My question due to the front driving both a 6”...

You clearly have extraordinary color sense…

Good tip! Thanks…

I just ordered a Sunrider soft top conversion for my hardtop 4 door . Anyone have any experience with the real world experience?…..highway wind noise, water, Etc. https://www.bestop.com/products/sunrider-for-hardtop-ford-2021-2023-bronco/

Installed a 200.4 Kicker key amp, 2 kicker 4” in the dash and the pods, 6.75” sub with Fusion amp, 4” kickers in the pods…calibrated the amp…then drove around for 4 hours to see if I liked the sound….I do! Then I ordered a bag of replacement clips!

Given the incredible amount of support and good advice I’ve gotten from the folks on this forum, I’m thrilled that I can finally contribute and give back. I’ve made so many back and forth tweaks I can’t remember what sounded like what. The issue now is if we play with Forscan we have to...

I also have a 23MY. The 2nd character in the middle set of numbers needs to be 2, 6, or A...depending on what speaker setting you want. See the graphic... The 3rd character set has always changed automatically for me. Here's my current settings... 727-01-01. 382B 2AF1 00AE 727-01-02 0900...

Sp/Tw Front $" Kicker Dash/Stock kickpanels (but not for long) Sp/Tw & Sp/Tweeter/Sub in the Pods (4" Kickers) EQ 0 727-01-01. 382B. 2AF1. 00AE 727-01-02 0900. 000D. 0047 I included the dictionary for convenience. This is Ragnakon's contribution... EQ Settings - ACM 727-01-02...

I feel like my dash 4" kickers are to sharp. Will going to 300's from the 600's I have on them now calm that down?

Are these in the kick panels or did you bump up the pods from 4" to 6"? Also, what's the impact between the Speaker setting and the Speaker/Tweeter setting? Especially if I have the EQ at 0. I'm still not sure how they all play together. I do know one hard and fast rule is if changes are made...

Were the kick panel speakers installs a pain in the ass? I need a break!

Did it improve the overall quality of the soundstage? And, did you rerun the kicker 200.4 calibration? Since I'm now running the sub, should I be starting with Forscan's 7 speaker As Built, or 6 speaker as built? I'm confused in terms of the choices between Spear, Speaker/Tweeter, and Tweeter...