Search results

People have their rights to enjoy life in their individual ways, including "waste of a Bronco".

Look at this lucky guy ! In Production, Built, Shipped, all within 24 hours.

Dash board shows 20.6 MPG for the first tank, including more idle running during setups. On 33", not too bad. I chose the 43 LB Cooper Discoverer AT3 4S 285/70/R17 tires and the 28 LB Alpha-Delta 17X8.5 rims. 71 LB per wheel is not too much heavier than a 57 LB wheel on the stock Base Bronco.

It was picked, paired, picked, paired, nothing, then delivered, all in a week. Good luck!

Tear Tag LPT3. Don't know when in the last 10 days it got updated.

@Wark The trouble is that one has to open the side-opening gate to 91 degrees to be able to lift up the window. In a parking lot, if I park the Bronco toward the outside (so to leave easily) and a car park behind me very close, then I cannot open the gate. The good thing about the 2 door Bronco...

@Wark You mean the window? No, haven't tried that yet. Just didn't bother closing it while going to install the Curt hitch.

For our base trim, there is not even the waste of a trim badge. I used vinyl sticker from eBay, $10.49 for the pair, extremely easy to work with. https://www.ebay.com/itm/304382106402

Outside done, except for fog lights.

I also remember those pre-VIN days. There was nothing but waiting in the dark. There are those still in the dark after 600 days. Sorry, I am also just another Bronco buyer. 6 months before VIN, 2 months before blend, 5 weeks before picking up. 285 days of anxieties. Consider myself as a lucky...

For me, it took 5 weeks from Blend day to Driveing the baby. And I am 70 miles from the plant. So, be prepared. 3 X Good luck !

With the VIN, one can see the window sticker when it is ready. See above.

https://www.windowsticker.forddirect.com/windowsticker.pdf?vin=1FMDE5AH2NLB11512 Use this link to see your Window Sticker. Find your order number in there: H29L. Then use this link to see your "pizza tracker": https://shop.ford.com/vehicleordertracking/status/?vin=1FMDE5AH2NLB11512 The pizza...

I put a 32.8" (633 turns per mile) set of tires on my Base. The working circumference turns out to be: 2508mm. Of course, any number in 2500-2510 should be good. This is my test result. The formulas are all giving me too big or too small numbers. 2609 would be way too large in practice. I used...

Base Bronco

I just saw the Check 4X4 box this morning, and the Service Vehicle Soon, but I do not have 4A in my Base Manual Bronco. I never moved away from 2H since getting the Bronco last Monday. Replaced tires from 30" to 33" on Tuesday, Changed the circumference with ForScan yesterday. Would this...

I got this tire.

call 800-334-4375. If lucky, you may find a nice representative able to tell you something’s.

What is the desirable poke for you? Such as 285 tire and +35 offset = 35mm poke? 305 tire and +25 offset = 55mm poke? 315 tire and 0 offset = 85mm poke? Will you replace the flares?