Search results

yep, that's where I made the mods for both left and right

yes, I did. I disabled left and Rear Turn lamp outage, individually in the BCM modules. the only thing this did was stop the fast clickering of the turn signals. my turn signals are flashing red, not Amber

thats the same company, I had reached out myself. they answered my email and said they do the work. I am in California so no chance of getting this done [email protected] - Kim Hall is whom I was dealing with

let me know what you find out, please

that's a good price for them, good for you. its the actual outer red that is flashing red. so basically the brake light flashes red. I'm ok with that. I read that LED equipped vehicles have a different harness that the halogen, thus the issue with the amber light not working properly

I am not 100% sure of the part numbers, I didn't write them down. I purchased some take offs in regards to the forscan mod, some people are saying the "they flashed them" not sure what that is. I changed the BCM settings Right and Left rear Turn lamp signal outage to "disabled" (each...

Yup, exactly

I replaced my halogen to OEM Led's and they work fine. I dont get the amber turn signals but they do work as flashing red.

I had the exact same issue, with Mabbet and another aftermarket off Ebay. I purchased some take off OEM's - did a mod via forscan and now both work as they should

it worked for me. yes

I am not sure what they mean by "flash them" it took me months to figure this out

they were OEM's it had the ford logo and part #s on the, and yes after I made the changes in the BCM module they work fine - a huge relive.

I actually just finished doing that, and after several months of trying to get help. I figured it out on my own. you do have to go in and change the settings via forscan in the BCM module where it says about "rear light bulb out" and disable it.

I ended up getting some OEM take offs, tried 2 different ones from Ebay and were no good. I did have to adjust the modules via forscan

I'm in the OC, I just purchased a OBD toggle and wanted to update the system to allow my LED tail lights to work. switched from halogen

So the Mabett tail lights didn’t quite work out, the passenger side trim sticks out the light goes in and out If I tap it it lights up So I’ll be sending them back What did you do with your OEM tail lights?

I'm interested - still available?

I'm interested!

ISO of a set of OEM LED Tail lights