Search results

I dont know which wire colours are what before it goes into the box. But it does looks like you've joined Negative and positive together. I would try joining the two purples as your negative and then the white/orange and the yellow as your positive. All channels in our amp have overcurrent...

The install guide does need an update. There should have been a piece of paper in the box that states the colour wire for each output, it should have sub as pink and pink/silver

Sorry for the delayed response. On the new harnesses we no longer use the factory sub wiring as it caused too many issues. There is 2 pairs of pink and silver wire hanging off the harness, this is your subwoofer wires. Join the pinks together that is your positive and join the pink and silvers...

What subwoofer Box are you mounting on? You can use a different ground point for the ground wire too

Great setup. Glad you're happy with it!

Order the Bronco kit and use the code 2DRBRONCO and youll get an aditional $80 off and we wont include the mounting bracket which you cant use in the 2 door. https://mobridge.us/wp-admin/post.php?post=3587&action=edit Thankfully we do have a tune for that exact setup with the kicker. I have...

Coming middle of December!

@Hemisfear mounted it in the rear wheel arch, this is what we recommend for two door owners. The factory amp and our amp can't be used together so I can only assume he's keeping it there for safe keeping

What speakers are you running?

It does it if you're prepared to mount it in a different location. Our mounting bracket on the stock sub box won't fit

It should be set and forget after the initial tune, it shouldn't need hours of playing around. I am free today and most of this weekend if you wanted to give it one last shot at getting it dialed in. Just let me know

Shoot me a message when you get a chance and we will have a call to get it dialed in. I'm confident after a phone call and a tuning session we will get it where it needs to be

The tune that is on our website has basically no eqing, so this will sound good for some speakers and terrible for others. For example with the JL C1 tune, we had to bring down 10k+ by 10db! They sounded painfully bright with the stock tune and after a mic tune they were singing.

Have we done a tuning session together? Your worst case scenario here is buy a mini DSP umik-1 and we can do a tuning session together and it will be a night and day difference. The K2 amp has won multiple car audio competitions so your audio not being where you want it is not going to have...

The update to fix the occasional no audio on startup has now been released! Should also have slightly better thermal management too

I am not sure if they will or won't, haven't had any info either way. I will try and find out and keep you updated.

Happy to answer any questions you might have! @mmild01

I have installed these with a set of ford speaker adaptors with zero other modification

Hey Dan, Muddiness lies between 300-700 hz typically, i would try dropping those frequencies down on the master eq as a starting point. 1. 6 inch speakers in a 2 way setup like the bronco should run from 80hz-300hz, this is your mid bass. Below 80hz is sub frequencies 2. Leave the crossover...

We actually are working on a fix for the no audio on startup, the fix is in beta testing at the moment and should be released first week of November. Keep an eye out. What was the ambient temperature out when it overheated? If you can recreate this event consistently I can send you some...