Search results

I installed mine a few months ago. Only 4 wires. One wire on the right side will be your right signal then the other 3 will connect on the drivers side. People will tell you that you have to remove the grill and the headlights to do this but that’s incorrect. You can simply remove a few plastic...

This is my backup plan. I’m to lasy to remove the top of the Bronco 🤨

Man calm down. I’ve purchased multiple items from Mabett and each and everyone of them has been perfect. The guy works his butt off and works very long hours. He didn’t say he wasn’t going to make it right. Cut the guy some slack and have some patience. You think coming on here bashing him is...

I mounted a fire extinguisher on each side of the rear bar. I cut a couple of brackets on the CNC that fit the existing threaded holes in the bars and simply bolted them on.

Do it right and hook them up to the headlights with the supplied harnesses and join the two smaller harness’s while your down there, run the two small red wires up to the fuse box ( I tee’d them together before I tapped into the fuse box) and they will work with or with the lights being turned...

You need to run the two big adaptor plugs to the headlights and if you want them to work day or night you need one red wire with the two shorter harnesses up to the fuse box in the location I showed. Remember to check the short harnesses to make sue the pins are locked in the plugs housing.

Here’s where I tapped in.

Either way will work. I pulled it up from the bottom.

Hi everyone. I discovered a small issue with the short harnesses in the kit. Please view the attached photo. This should save a little frustration.

It’s easy. I just did it. Just use a thin fish wire taped to the fish wire and it’s only a minute to do.

It’s beautiful. Love it. 👏👏

I agree to a certain point but even on a cloudy day they are nice to see on. After I found the issue I went back and fixed the issue and now they work as designed. They come on as soon as you start the Bronco, day or night. They are a nice accessory.

Actually the led flicker is caused by the camera. If you could change the shutter speed you could stop the flicker. There’s nothing you can do with the led portion to stop the flicker other than turn them off lol. My trail sights are on now that I have them wired to the fuse box. This is where I...

Mabett LED Sight Lights Product Information Report Guys the two small red wiring with the fuse holder that comes with this kit is so that once installed your LED Sight Lights (both park and signal) will work during the day and night. With out them hooked up you’ll need to turn on your...

Well I got the Mabett for Bronco 2021 2022 Design lights installed today BUT I ran into an issue half way through. As promised I said I would let you know how it all worked out. This is a fantastic product but there’s an issue that I have discovered during the install. I will do an update when...

Looks good Bill. Money well spent in my opinion.

I like the silver beauty rings and Area 51

When I installed my pro I knew about the ends sticking out do before I installed it I drilled two holes on each end abd used a zip tie to secure the ends. Worked oitngreat.

Thanks. I’m happy to hear it’s helping you out. As for the LED. Put it in an area where it’s very visible, that way you can see right away if it was activated as you approach the vehicle and also any potential crooks can see it and be warned to stay clear. As you can see in the photos I provided...