Search results

Morning - yes, when I installed these lights, I removed everything that had red wires in it. They are all set up for the halogen side of things. Here are some pics I took this morning (for this response) of how I installed them and which harnesses I used. Now again, my video and these lights are...

Hey no problem! So that connector/harness could really do with being a bit longer. I had some trouble getting it seated originally. It needs like another half inch of wire. Mine were a prototype set of lights so didn’t know if they had changed at all. If you’re taking them out to check them...

Did you have a short connector that goes from the center of the light to the edge (the top pic I posted)? Here’s my installation video:

Were you replacing halogen lights or the LED lights with the Mabett ones? Did you have a long red wire that ran between the lights or did you have small harnesses for each light? The top image is set up for the LED lights. The second image is set up for the halogen lights.

Depending on your % off-road vs on-road, if you don’t want to have to rewire anything, this might be a solution for you. It’s what I did with ours. Still really bright but angled just slightly so as not to blind oncoming traffic. Again, might not be at all what you want to achieve, but just...

More video installations! Mabett Dual Mode LED Fog Lights: Xomzema Tube Doors: Xomzema Tail Light Protection:

When I recorded my install video (above), I was sent a prototype version of the tail lights. The connector that comes on them is plug and play with a load resistor to work directly with the Halogen tail lights. Simple plug and play. Being as I had the LED tail lights already, I was sent an...

If you look at my video above at the 3:24 mark you can see the animation. It’s really smooth, not jerky at all.

Yes they are. I did an install video of the prototypes a couple of months ago. Easy to install:

Added some new tube doors and tail light covers/protectors this weekend. Happy with the quality of both of them.

Just make sure I’d doesn’t say ‘renewed’ in the fine print. I almost got caught out with that.

Yes it was on Amazon early on. They sold quick. By lunchtime they were selling refurbished ones for around $780. For once I didn’t procrastinate and just went for it.

I snagged a DJI Mini 3 Pro with the DJI RC (screen) controller for $693 (Normally $909) to see about enhancing my YouTube channel a little more. Got me some learning to do now!

My buddy Jody at Bird Dog Off Road Adventures recorded a video of how to assemble the latches. Hope this helps out:

Hi, I recorded this video, and the latch mechanisms arrived preassembled for me with this set, so that's why I didn't record the assembly of them. I wasn't aware that the sets of doors may come with the latches unassembled.

Did the Mabett ones here too. They were one of the first that had a decent fit to the Bronco and easy to install.

Gotta love the CG Broncos!

I will be testing out a set in the near future. They mount to the same points as the OEM bar and I’m hoping that both can be installed together.

Installed the Raptor Style Fog lights by Mabett last weekend. Really like how they look and the functionality of the remote control!

Checked out the Raptor Style Fog lights by Mabett last weekend. Really like how they look and the functionality of the remote control!