Search results

bump agsin

https://www.bronco6g.com/forum/threads/badlands-wheels-tires-tpms.46094/

For Sale Ridergraphix RETRO SPECIAL DECOR STYLE SIDE GRAPHICS KIT (WIDE BELOW BODY LINE) for Four Door Radius style in Matte black https://ridergraphix.com/store/2021-up-Ford-Bronco-Retro-Special-Decor-Style-Side-Graphics-Kit-Wide-Below-Body-Line-p406680683 Bought them before the Bronco...

Pretty good video, but there is no reason at all to remove the whole sta-bar system like they did. I just loosened the lock collar and removed the 3 bolts holding the bracket and slid it over to make room to slide that bolt out. I also left the tie rod connected to the LCA but it may make it a...

I did the method of dropping the LCA from the frame, because for some reason watching the videos of those guys beating out the axle shaft made me a little uneasy. Something I ran into and not shown on those was that I have the swaybar disconnect so the mounting brackets and extra skid plate are...

Another word of advice if you do any lift and go to get an alignment you may want to call ahead and make sure they have the specs for a Bronco before you go there. I made an appointment at a Firestone Autocare Center and got there and waited a bit and they came and told me they didn't have any...

Thanks! I have the pics posted up above. I really like how it turned out with the new stance! Also for anyone interested @flip posted some information from the workshop manuals with even more info here for torque specs: https://www.bronco6g.com/forum/threads/front-end-torque-specs.43635/ That...

Yeah I have 35's so I think there would definitely be room for 37's

Before and after. Currently it raised the front 1.5" and the rear 2". So still a slight rake which I'm fine with. I'll check it again after driving a while and getting an alignment. Definitely love the height it setting at now!

Awesome! Thanks @flip ! This should definitely be added as a sticky in this section of the forum as seen here many people are starting to look for this stuff. Also any help with the rear?

I plan on doing a perch collar lift kit today and I'm having trouble finding torque specs too. I need front lower control arm inner bolts (next to frame) front and rear lower strut bolts. I've dug around on here and found the rest I think. If anyone has the top strut mount specs too. Any...

I plan on installing mine today but I'm having a hard time finding torque specs for the suspension parts. I've searched on here and found a few things but not everything I need. Any help would be appreciated.

Anyone have the torque spec for the front lower control arm inner bolts next to frame? Also the rear lower strut mounting bolt? Thanks.

Price drop to $1600

So I did play around with this some this afternoon. I tried the plain english options with the drop down menus first and there was an item that was something like "50/50 camera at speed". It was set to Disabled so I changed it to enabled and drove it around the block with no noticeable change...

I would take $1500. The tires alone are about $1500 new and about $200 for the TPMS so you would be getting the wheels for free.

OK I may try it this afternoon as mine is in the garage were it is fairly cool...lol. I'm just very new to Forscan so I'm a little wary of possibly being the guinea pig.

I saw some mention of working on the "cameras at speed" a few pages back and I also stumbled on this thread where it was mentioned that they may have been unlocked on some of the cameras on the F-150...

I got my Badlands hood vinyl installed and really like how it turned out.

Yeah a local shop quoted me $350 to install and $50 for front alignment. I called the dealer for a quote hoping to possibly use my rewards points but they haven't called back yet. $1200 is nuts. I can probably do it myself as I have replaced shocks on my truck before and may do it if the...