Any trim would work for you. My recommendation is stick to the simplest option packages. The more electrical garbage like dual AC zones, 360 cameras, blinky mirrors and such is more that will eventually go out and is expensive to fix. If you don’t plan on keeping it much past warranty then have...
I religiously uv protect the plastics and rubber because there is so much of it. Stay on top of filters and fluids. Cool down a little before turning off if coming off higher speeds or not much idle driving before turn off. I hand clean and inspect undercarriage just to keep an eye on things. I...
IMO it’s a limited market. You can only do so much with the design. And most aftermarket parts like bumpers are tubes or flat stock pieces just welded together. Cheap and easy. Aftermarket can’t invest in stamping forms or custom molds or they would. The few plastic ones for non Raptor look like...
I recorded the entire ride in Vegas on dash cam. The staff gets good action shots available for purchase usually catching driver and any passengers quite well. I would enjoy the Off Rodeo itself and just get still shots when you stop. And the dash cam of course.
The gen 1 Bronco has cool lines. Which the 6 the gen shares. The GM never looked good. So either the new one will not look good or it will not take its styling from the old one. Bronco is still the winner.
Luckily I’ve made my wife afraid to drive mine. I have her deathly afraid of scratching it, sliding out of seats or slamming doors. So it’s all mine.
Surprisingly very little that over comes normal cabin/wind noise. Out Bronco, I mean Sport is far worse. Our Maverick is pretty far quiet too. But the Bronco although louder, the rattles just don’t exist. And I have OCD. I did fix some the audio system exposed at high volume.
https://www.tapplastics.com/product/repair_products/plastic_adhesives/weld_on_2354/134?srsltid=AfmBOooLats9u_Yx9xjKk21yh_Q5OTVlTBeeBzJsmLQe-KIHcwekg2Z6
You will find all you need to know here
I believe it is ABS plastic. There is an ABS solvent cement. It’s water thin and applied with a syringe needle style plastic bottle. Hold the two halves together and let the solvent flow into gap. Hold for a minute. Good as new.