Search results

Another line of investigation would be the LOC you used. Most of the common ones out there would be fine for the Base sound system, but some LOCs are designed for higher input. (I had to get one of these for tapping into the B&O amp output.) If you happened to get a LOC designed for higher...

Yeah I'm hoping my impact is strong enough for it, otherwise a 4' piece of pipe is waiting in the corner. I've been wondering too if that thread compound would loosen up with a little heat. I e read horror stories where guys were putting the equivalent of 800lbs on them to break loose (4'+ bars...

I'm torn. I really like the look and durability of these, but isn't the durability a problem? If you "nudge" something solid with these, wouldn't we be looking at a deformed fender rather than just a broken plastic flare?

This looks like a great product, and I would definitely upgrade my DIY version if this does work, or could be made to work (well) as is with the Bestop trecktop: There is almost no clearance between the Bestop and the protrusion that your headliner is shown sitting on (center front of...

Very nice work! This option would make me more likely add a winch. My only concern (and I hate to be a back-seat engineer) would be whether some beefy reinforcements should be added from your mount and the frame to the exit point on the bash plate (or even completely float any such...

Perfect! Thanks for responding to the question asked. After reading the first response I was worried this would turn into a shit-post. 😂 Complete disassembly of the rear suspension seemed like overkill, so I'm glad I won't have to, nor will I have to buy anything else.

So I leveled the front of my Bronco, but need to add the same kit to the rear for a little rake. You would think that the rear should be a piece of cake compared to the front, but the only instructions I've found for the rear suggest that more tools are needed than I possess, and I wonder if...

They do not solve anything directly, but going through them has at least two benefits (discovered when I had a gremlins/bent pin on an audio module): 1) If your dealer isn't doing what they are supposed to, this department will help get you prioritized for parts, and service. 2) They may offer...

Yeah you are definitely stuck with aftermarket lights with the mod, but some people have been trying to find a way to get Raptor mod bumper ends & their factory fogs (possibly upgrading the LEDs). Haven't seen any success stories yet. The choice between mod and capable was tough for me because...

Thanks! Still needs some TLC to square it up better and find a really annoying squeak. Haha. Yes I did, but I did have the benefit of having the B&O system to start with. A Polk sub and that little amp do very well in the stock enclosure. Matted the B&O box then sealed the port as an...

The panels look useful. Any chance you could provide the distance they protrude from the plastic interior? The measurement right at the rear/tailgate end would suffice for me. I'm hoping they will be able to squeeze in beside my drawer. Not just for scratch protection and handy MOLLE points...

Thanks, but at the moment, no. I am still not convinced I have a problem, or that I could repeat it for the service guys. I will come back if I come to a concrete conclusion. At the moment, the only way I can describe it is as an eerie feeling when downshifting to first at slow speeds. Not...

To be fair, those are extremely helpful threads that flesh out the issue, and you did say "or will I have to wire one up", potentially referring to the missing factory switch at the center of your question. When the time comes, I will need to reference those threads myself for: 1- Which Part#...

I have had a similar experience but in completely different situation; so this is either completely unrelated, or possibly another variable with which to determine cause: I have a 7MT, and on several occasions while engine braking to a crawl ahead of a red stoplight (in 2-Hi), I get a lurch...

Sure! It is a stock SAS aside from a 1.5“ level kit, wheels, and tires. The weight I added with the drawer and sliders almost necessitated the level, and now I need to bump the rear to get a little positive rake. I grabbed some lighter Fuel wheels (31Lbs) to offset heavier tires, and make the...

Kenda 10.5 here as well. For the price, I couldn't beat the deal. The Sas tires were WAY too lightweight for my liking. Don't want a flat just for driving across thorns. 😆 Although, depending on how you want your rig to look, these are not plump at all, and with an increased offset wheel, it...

I don't understand all the hate, aside from the slightly inflammatory title. 😆 If I've condensed the argument fairly.... The Bronco is great at almost everything, but the OP was bummed to find one weakness in the geometry where similarly equipped vehicles could pass particularly tall/narrow...

Have to enable the option in Forscan. It's confirmed to work. Cannot understand why they didn't enable it, unless (and just a wild guess) maybe there was a bug/glitch/issue found for vehicles with removable doors?

The link to the product I purchased shows a different title & picture now, so I cant guarantee its the same thing; but I posted it below. Maybe that is a good thing: I am really unhappy that the carpet I recieved was a light grey.... compared to the stated color (charcoal) and darker product...

I'm going the opposite route, someday, due to the 5mph limit. When I decide what lights I want and wire them to an aux switch, it should be easy enough to run a wire (and diode to prevent backfeed) to each puddle light from that circuit. Puddle lights at any time Unless of course the puddle...