Search results

Nice. I wanted to use a carrier for my CRF450rl. The static load was close to the max but once I did the formula for the leverage effect, I was way over the tongue weight. Went with a nice Kendon fold up trailer. I've had this discussion with a lot of guys who only looked at static load and...

Ford just issued a safety recall on 5/15/2026 for the delamination or cracking on the exterior skin. Right now it is for the 2021-2022 w/build date of 9/23/2020 thru 01/13/2022. If you can wait it out they will probably expand this as other years are having the same issue. I see yours is a 2023...

Top Lift Pro. Buy off FB marketplace used, $500-600. I did get a chuckle out of that video. I have experienced NONE of the "problems" that were exaggerated. I also relish cranking my arms off to lift off my top.

Really surprised no has “dipped” their top. Easy DYI, cheap and reversible. That was my plan but Ford ponied up a complete new top for me...

The Toplift pro is compatible with Jeeps and Broncos (4 door). The longer supports that slip in are for the longer top on a Jeep. You don’t use them on a Bronco. The lift will just go in thru the rear glass, be careful of your speaker pods. Center it up and push down on the handle. Should be a...

So far, they are better. They are constructed differently as they are fiberglass and not composite.

So when you unplug the kicks you have also unplugged the dash speakers. The kicks and dash are wired in a parallel. The current goes to the kicks and flows thru the kicks and onto the dash. If you look at your stock kick panel speaker it has 4 terminals. 2 go to the kicks and 2 for the current...

FB marketplace and buy a used Toplift Pro for $500-600, It will be like new. They the Cadillac. No cranking and cranking and cranking, just 1 push and it's off.

Got mine done today. If you are running a kicker 200.4 or ready to install one, bi amp is the way to go. I have 6.5" pods in the back did the forscan change to "speaker" from tweeter prior to this change and even the rear pods sound better than it did wired to the plug and play harness. You...

I am not saying anything about the effectiveness of the deflector or how it works. I am saying your first statement is wrong. They are not just claiming to just protecting what is underneath the deflector but that it helps "shields " the windshield.

Yes, which refutes the claim that manufactures only claim it protects what is underneath. I understand there is no presented evidence of effectiveness. MY point is his first statement was incorrect.

No, some do promote protection of the windshield. See Bugflector and below. AVS Bug Deflectors Comparison

Chat GPT is your friend. In twin-turbo engines (like the 2.7L or 3.5L EcoBoost), the turbos sit on opposite sides of the engine. The driver-side turbo has a relatively straight path to the intercooler or throttle body. The passenger-side turbo usually sits farther from that common...

Forscan change chimes from speakers to dash only. There is another way without using forscan but I cannot find that post. (6) Every chime is louder after amp & speaker install | Page 2 | Bronco6G - 2021+ Ford Bronco & Bronco Raptor Forum, News, Blog & Owners Community

Got mine installed doing the 1 hinge at a time method. It was pretty easy. I'm impressed how quiet the tailgate is now. I was kinda skeptical if it was going to do much since it only bolts to the one side of the spare tire carrier, but it really does work.

Whelp, you may have encouraged me to look for different oil than Mobil 1. According to chat gtp you are correct, natural gas oil better. What get me is the excellent flow when cold.

I have the same harness. If you haven't found your answer, purple is + right, black is - right and green is + left, brown is - left.

If you have changed the plugs, I would suspect the coil packs on cylinders 1 & 5. To check I would (and I have done this) move the coil packs around. Put coil pack 1 in cylinder 2 and 2's in cylinder 1. Then put coil pack 5 in cylinder 4 and 4's in cylinder 5. Drive it and if another misfire...

And one more question, hopefully, I am leaning now towards replacing my kicks. With this new set up would you recommend a component speaker (mid range?) or is a 2 way ok?

Ok, this actually sounds pretty easy, just a little more time consuming. You mentioned a Metra connector and drilling a small hole for the wiring. Does that connector plug into the speaker with the new wiring to connect it, or did you use spade connectors, and the Metra connector was for...