Search results

The OEM plugs hang entirely below the bumper. There should be no issue with them. Since this has been asked so many times I've got an oem hitch coming so i can take actual pics. With the door open there's a good step, but with it closed not so much. It was purposely designed to be as tight to...

Are you asking about the trailer light connector? If so it will be in the same place as always. the factory bracket hangs below the bumper.

That actually looks pretty cool, and there's no reason at all you couldn't do that with either paint or powdercoat. In fact I might just try it myself.

The hitch is mounted to the crossmember just like normal. The bumper sits directly on top of the outer face, and the bolts run through everything. The factory hitch has the harness down by where the safety chain hooks are on this hitch, which is well below this bumper. I'll be posting an install...

Since you asked, and since i had some of the test parts sitting around, i went ahead and painted one up to show how it looks with the blockouts. The most common powdercoat is textured black, and I don't have that in a spray can so i used satin black. The powdercoat would match the round plug...

We recently released these here at SFR. More towards the slider end of the scale, but they do make it easier to climb in and out, especially to the back seat. https://www.stinkyfab.com/collections/bronco-parts/products/coming-soon-6g-bronco-2-door-rock-sliders

As someone who just designed both front and rear bumpers for the Bronco I can tell you why the rears cost a little more. They are more complex to design and build. Our bumpers are purposely quite similar in design front and rear, but because of the shape of the rear door and how the mounting...

We supply covers for both the sensor holes and the light cutouts. The sensor holes especially would be nearly invisible on a black bumper. It's difficult to make too many options in something like this, as the cost to inventory is HUGE. Someone with sensors can't use a bumper that doesn't have...

It absolutely makes sense. If you don't have lockers as soon as a tire lifts all the power goes to the tire flailing in mid air. You want to keep the tires on the ground as much as possible. Having the sway bar disconnected means the tires stay on the ground more, which means more traction. It's...

Spent the day welding, sanding and painting, then got some better finished pics.

Price hasn't been finalized, but it'll probably be in the same neighborhood as our front bumper. Maybe a few bucks more, but not a lot. That one is $1150 with free shipping.

Been working on this one for a while, but been delayed with getting a bunch of other new products into production. Just got the first test pieces in and pretty excited to get it all finished up. Main goals for this were to have solid recovery points, compatible with tow hitch, light weight...

I found this connector on ebay that fits. I'll be wiring mine up tomorrow most likely. https://www.ebay.com/itm/254762922777

That actually would have been quite difficult for Ford to do with the bronco because the bumper is entirely below the body and floor, unlike a typical sedan or wagon where the bumper cover is actually covering the lower section of the body.

Well we picked it up today, and I gotta say our dealer knocked it out of the park for us. I was nervous after seeing all the horror stories on here, and when I saw the higher sticker price. It took a couple days for the dealer to get everything sorted out on my missing private offer cert, but...

Ok sounds good. The day I ordered I was simply told "you'll pay this MSRP" referring to the initial order, and then when they had me transfer to MY23 they provided a new build sheet with the new price. They haven't started giving me a headache yet, and it sounds like they want to do right, but...

Let me know if I've got this right. I ordered in December 2021, Added Lux in July 22, converted to MY 23 in Oct 2022. No other changes to order. 2Door Badlands SAS LUX I have the build sheet from 10/22 with a price of $57475. Subtract the Private offer that came out within a couple days...

Yep, should have made my way through there first. Oops. Someone tell me if I'm reading this wrong. Column B shows $2450, add Column C at $2000, Column D at 500, and Column DD for SAS and LUX at $750 each, and I come up with $6450 that should be coming off the sticker correct? That brings me...

So I just got the news that the 2 door badlands I ordered has finally arrived, however now it looks like there might be some runaround on the pricing. I placed the order in person in December 2021. I don't remember the exact price at that time but could probably dig it up. In July 2022 I added...

Not sure how he could possibly patent something 74weld has been making and selling for years, not to mention all the factory applications on other vehicles.