Search results

Yes. Good luck. I really don't know if his specific truck has items that are holding it up. I was just told he was supposed to get the first one alotted from that dealer but apparently if did not work out that way.

With MIC top: THe wind noise is far worse with just the 2 front panels off as opposed to removing the whole thing. I drove on the freeway at 75mph with full top removed and windows up as it was cold. The wind was actually tolerable. Not bad at all.

I am in Houston. I know the person that is supposed to get one of the first alotted(I believe the first) from this dealership and he still has not received his Bronco. As for the dealership, I have not heard anything bad.

It is rubber insulation. Doesn't compress as much as the cheap foam. Figured it would be better for the edges/rubber gasket of the hardtop.

Plenty to do in Austin. 2 popular areas are: 6th street is more of the young crowd. Rainey Street is a little bit calmer but fun and nicer.

I saw some similar designs with Jeeps/Youtube videos. It actually works fairly well. Park truck where you want to lift up the top, mark ceiling. Tape the floor around the drivers rear tire. Make a box so you know where to pull back in. You can see it when reverse back in if you open the...

FIXED! I couldn't stand it so I went out there and messed with it at lunch. On the harness there is a white wire grounding eyelet at the left side tailight that I thought was grounded but I had attached it to a piece of trim that had a rubber grommet on it. The screw was not touching the...

I installed the curt hitch. The bolts seemed too long but they will go through. One trick was to insert the bolts from the top of the muffler instead of angling up from the bottom. There was enough play that you could wiggle the receiver just a bit and they would eventually go all the way...

Yes, it is the one that others have used and have been succesful with. Hopefully someone will chime in. Thanks!

Hi all, I have an Outerbanks WITH the LED Tailights. I hooked up the Curt wiring harness and things are acting all wonky. I thought it was working but when the lights came on Automatically this a.m. things starting acting weird. 1. The turn signal blinks really fast, like when a bulb is...

Yes I did. One of the first posts I saw when researching. Thanks for posting. It solidified my choices and to keep the wheels. Maybe Ford design engineers will see this.

I have had KO'2 on several vehicles. Never even thought about going to another tire. They are as good as the best AT out there. You can argue all day long but they are solid. Zero noise now since they are new. Never noticed any road noise on previous sets. Its Carbonized Gray. THX

I got mine on Etsy. The design is perfect but it did not include the double sided tape. I did that myself with an exacto knife. I would not recomend doing this yourself unless you are a really handy precise person. It is hard cutting that tape.

I had the tires removed at crummy tire shop. They were so confused cause they were just taking them off. Charged me $15 for all 5. Took them up there with one of our flatbed trucks, Bronco was on stands in our shop. Kept original sensors. Had them powder coated. Had an appointment so it was...

I had the exact same thing happen to me as I was leaving the dealership with my brand new 500 mile Outerbanks. Same Vacuum line error. I went straight back to the dealer, they checked it and could only find the error codes. The light went off when I was sitting at the dealership (mad) for...

at least have a purpose if you are gonna do it....

So I think these BFG's look better proportioned than the stock Duellers. The Duellers have a rounded profile while the BFG's have a squared boxy look. It is night and day difference. I do think this size is the smallest you would want to go and still look agressive. 33's probably fill the...

Hi all After seeing a few others powdercoat their OBX wheels, I decided to follow along. The PC guys calls this Matte Black. It isn't really flat or matte...it just is NOT glossy. It has a smooth finish. Cost was $125 per wheel. I went with BFG KO's in 255/70r18 which is the stock OBX...

I traded my 2015 Tundra (huge backseat and truckbed) for my 2Door Bronco. I seldom had people in the back seat of the truck - just stuff and groceries. I did use the truck bed frequently. I do have a small trailer so that won't be missed. I LOVE the size of the Bronco, zippiness and...

.