Sponsored

Search results

  1. Baja designs pro triple fog light advice for modular bumper

    cool thanks! This is what they look like up close. I can’t remember which one I took the lens off of and rotated, but it was only one of them. When it gets dark tonight I’ll take a picture of their beam throw and post it up but the beam seemed to be in the correct horizontal orientation, if a...
  2. Baja designs pro triple fog light advice for modular bumper

    The white ā€œBaja designsā€ text was at the top, just like the picture. Just the etching on the lens was on the left, as if the lens had been attached 90 degrees off compared to the other two. I knew I’d probably be voiding warranty but I undid the 4 Alan screws and rotated the lens so that the...
  3. Baja designs pro triple fog light advice for modular bumper

    Yeah, the lens cover on one of the yellow SAE lights, just one, had the SAE and BD etching on the left side of the cover if viewed from the front. The white ā€œBaja Designsā€ logo was still on the correct spot at the top as was the interlocking BD in the middle of the light. It must’ve been just...
  4. Baja designs pro triple fog light advice for modular bumper

    Here is my Baja designs triple fog kit from @SPVPARTS with the long mounting brackets from @4x4TruckLEDs.com since the modular bumper didn’t come with fogs on my ā€˜24. Wired each pair to aux switches 4,5,6. Amber SAE, White SAE, and squadron pro driving/combo. The white SAE in the middle...
  5. Looking for ID of unknown wiring harness near driver side tail light

    I was able to fix this on my own thanks to the wiring diagram posted earlier. Just felt around blindly for the harness terminal on the interior plastic trim panel and rotated the loose harness until it was apinged to snap in. My tailgate’s keyless entry functionality was restored and the rattle...
  6. Looking for ID of unknown wiring harness near driver side tail light

    No, my tailgate keyless entry has been working poorly now that you mention it. I guess this was a case of shoddy dealer work on the dealer installed towing package option. Sad, but I’ll guess I’ll have to take it back to them.
  7. Looking for ID of unknown wiring harness near driver side tail light

    '24 Wildtrak Lux Had a gnarly rattle near tailgate area. Made my wife drive me around in the cargo compartment and found this dangling near the driver's tail light. It was swinging like a pendelum and making a hellacious noise on bumps or accel/decel. The only thing I had done in the...
  8. Gnarly tailgate rattle

    I had to look straight back from that panel toward the back, this cable and harness was dangling straight up and down almost all the way back at the taillight. I spotted it with a small flashlight pointed toward the tail in that opening and just sticking my arm in there and feeling around. It...
  9. Gnarly tailgate rattle

    Found mine. Made my wife drive me around while I sat in the cargo. Found this dangling like a pendulum in the behind the left side back interior panels. It was dangling way toward the back and I had to reach my arm back there to reach it. Quiet now since I taped it up and zip tied it...
  10. Gnarly tailgate rattle

    I know it has been noted earlier but as the weather warms up significantly where I live the gnarly tailgate rattle has subsided somewhat. It still does it, but it's mabye 50% of what it was when the weather was below freezing 32F/0C every morning. Now that it's usually closer to 50F it's...
  11. Gnarly tailgate rattle

    Here is what it sounds like in mine, ā€˜24 Wildtrak (click at the end of the clip): put so much lithium grease and varied spare lug nut torque, torqued and Loctited carrier mount bolts, guess it’s just going to do this.
  12. Clicking noise, lower left rear

    I think you are describing the gnarly tailgate rattle sound. If so there is no apparent permanent solution and the forum believes it is coming from rivets that hold the spare tire bracket to the tailgate which flex under acceleration or bouncing forces. Sounds like engine knocking except it...
  13. Baja designs pro triple fog light advice for modular bumper

    Great, thank yoU! I'll put the Driving Combo (yeah all 3 of my pairs are 2x2) on the outside then! Ordered a few brackets from you so that the lights will be oriented correctly. For now I think I'm just going to wire it all to the factory AUX switches, since if I do want to run the fogs on...
  14. Baja designs pro triple fog light advice for modular bumper

    Thanks all, very helpful replies. The B.D. driving/combo pair are Squadron Pros with the higher lumen output. I am also getting a pair of squadron pro spots that I might use as ditch lights later. Doing some research into white SAE fogs as DRL’s is starting to make me lean toward wiring...
  15. Baja designs pro triple fog light advice for modular bumper

    I just received this kit from @SPVPARTS Specialty Performance Parts Baja Designs Triple Fog Kit I ordered an SAE Clear, SAE Amber, and Driving/Combo light for the 3 pairs. My questions: In what positions would you mount these 3 relative to the center/edge of the bumper? I intended to use the...
  16. Gnarly tailgate rattle

    2024's still doing it. I dumped a full can of WD-40 lithiuum grease spary all over the inside of the tailgate, covered the driver side latches, lubricated the passenger side tailgate hinges with LPS-2, took the spare tire off, retorqued the spare carrier-to-tailgate bolts and used blue loctite...
  17. Interesting Article on Bronco Sales

    Well, they may have found the limit on how much they can raise MSRP and still move all the vehicles their factory can churn out. Either that, or the backordered/backlogged vehicles that got delivered mostly in 2023 were counted as "sales" last year, so you had 2-3 years of demand pent up in 1...
  18. TAILGATE MEDICINE CABINET (S.T.A.S.H.H.)

    For anyone that has had one of these, does it rattle and how much does it weigh? I broke the factory panel in this location trying to get access for some grease to eliminate rattling, so rather than paying $40 for a replacement it might make more sense to get this. I believe my rattling was...
  19. SAS ride quality on interstate highways?

    I have driven the hoss 2.0 in a black diamond Sasquatch (same as what OBX Sasquatch has) and have the hoss 3.0 in my Wildtrak. Granted I wasn’t doing the same trails/roads with them on the same day, and when I drove the Black D. it was aired down to 20 psi and I’ve never had my WT below 30 yet...
  20. SAS ride quality on interstate highways?

    I have a 23 outer banks non Sasquatch with 4A and a ā€˜24 Wildtrak which is of course Sasquatch also with 4A. The outer banks does everything better on the highway, it feels like a sports car compared to the Sasquatch. The ride is better on the highway in the OBX stock vs stock, even with the...


Top