Search results

You might I was very impressed how the RCI bash plate lapped right over and basically was perfectly flush with the belly skids It was like it was meant to be

I thought the same as you about cutting but you'd have to cut the belly skid and it's a mounting point and I really don't want to give up that structural integrity on the belly skid either so I think sandwiching is better. In regards to the hidden nuts I would probably tack them in place with a...

installed the NVR belly skids. Another instructions not that great but there product is amazing!!! Super strong feels almost bulletproof now!!! Ford Bronco 74Weld Bronco Portals now available! 1000015408 Replaced my bash plate with the RCI one. It is 1/4" thick compared to 1/8" thick and had...

So I put them in place on both sides and I think I can get them to work but you would need a spacer plate under the one bracket per side and you would need to elongated the holes in the sides to receive the side bolts and figure away to hold the nuts on the inside of the frame because onelce the...

Yeah, they where all laying in the garage floor, and if they can't take my fat ass walking in them then there shit!!!!!🤣🤣🤣

Drove over some dirt in my yard.

Evening all, been traveling a bunch. Finally got the Turn Off Road tail gate and adjustable tire carrier installed!! Really nice product. Instructions meh... Feel better with the forty on the back now. Also installed the NVR belly skids. Another instructions not that great but there product...

You were correct sir!!! And going to be gone next week too. Poor baby is just sitting in my garage all by herself lonesome!

Just got back from FL running with T.O.R.R. with the Braptor, had a blast. Leaving this weekend for builder convention will be gone another week.... So haven't had any time after cutting the fenders to really run it but was clearing when I drove it. Still didn't clear with sway bar...

It is bare. Not sure if I see the need for a coating on it. The plastic SHOULD protect from gouges and such, it is why I sprung for the extra protection. I was not thinking of coating.

It's next after I get the Turn tire carrier on.

Awesome thanks when I get back I will definitely look into that. Down in Florida doing a run with the raptor! T.O.R.R club!!

Ohh I am committed alright.....😜😜😜😜

Please let us know when you hear more!

Who is using little ol 38's???? 🤣🤣🤣🤣🤣 At full stuff and backing up I get rub. This is about how much I trained I think that is enough but it is not if I use sway bar disconnect. Gotta play with it to fine tune it. Might just go to a 1 or 1.5 body and I think that would fix all kinds like...

I was a little paranoid about the single use bolts especially the nylock. Ordered from @flip but in talking with him he said they just re lock tight every thing. And that is what I did blue and red loc tite as needed. I did replace a couple of my locks but when you pull the factory bolts you...

Did the drivers side today and there is a wire conduit in the way. Not positive it would get hit but don't want to take the risk Took it a part and it was PACKED with dirt!!! And a crap load of wires. Wrapped twice with cloth tape and once with electrical tape Was able to tuck it away, and I...

So, it clears but only with the sway bar still connected I re-drilled the fender and put that bolt back in just to hold everything together but I moved it backwards of course You have to look to see it Locked steering going in reverse even at speed clears fine. I think I'm going to do the other...

So this is what happened when I backed down the hill.. But it almost looks like it's not touching the pinch weld of the tub

Yes here is drivers not cut But I did bang it back a little so not exactly stock