Search results

Herb is always happy to answer questions anytime. The utility rack that hold the fuel can holders is in the photo. It bolts to the swing arm with two 1/2-13 grade 8 bolts that go through welded-in sleeves (DOM Tubing) through the swingout arm. Extremely strong. The top deck measures 14"...

Yes the Sceptor holder we have been making could be mounted to the utility mounting trays on the Bronco rear swing out. (The NATO can holders bolt onto those trays that bolt onto the swing arm) However, the Sceptor can holders we have been making are being discontinued due 100% to slowing...

Herb, great questions. The bumper is designed to work directly with the OEM hitch. Two of the test trucks with protos of the bumper on them are running aftermarket hitches, and they work fine as well. Both of the aftermarket hitches mimic the OEM hitch in look and how they mount. We love...

100% compatible with the backup sensors. We provide specially made holders that retain the stock sensors, that mount in the bumper. No complications at all as all the OEM wiring transfers right over. Same for the backup camera, this is relocated from the door mount to the swing arm in the...

We do bring the tire inward at the top to increase the departure angle at the bottom. Would depend on how much room at the top was needed, but there is some. The vent block-off plates we built each have two HD tabs on them for antenna, sand flags, cell boosters etc. and those clear with...

The camera is relocated right back to the same spot in the center of the tire. Yes an extension is needed for the camera. We have them available for this. @Silver-Bolt nailed it. We are even seeing stock Sasquatch'ed trucks with the 35's wrinkling the back doors from bombing down fire...

Yes, here is a 39.5" on one of the proto-testing trucks. We actually lower the tire's center mounting point, then tip the tire inward to improve the departure angle. Same ground clearance but better visibility out the back.

100%! One single back door from Ford = one single swing out with a 120lbs gas strut to assist. Two swingouts for a truck with a single door will always require the operator to open and close that second swing, no option. It may not sound like much, but from customer feedback over the...

More photos on our website: Metaltech4x4.com

The Metal-tech 4x4 rear swing-out bumper is now open for orders! $500 off for all pre-orders shipping in Sept. This bumper has been in development and testing for over a year. It can carry up to a 40" spare 100% off your back door and frame mounted. Optional twin Nato fuel can racks on...

Yes Raptor Yeti bottle and the photos I posted above are from the staff photographer as I drove the truck. We have video we will post soon. Hmm, I only had to provide the VIN for our Raptor. With the vin in the registration system it allowed me to register. Our actual Raptor showed up at...

We just returned from the Raptor Off-Roadeo in NV. More photos and videos to come soon. Last Monday, I enjoyed joining seven other drivers in taking eight brand-new Bronco Raptors into the Mojave desert. The experience was one of a kind. As the owner of Metal-tech 4x4 with 35yrs of...

Yes about 7" with the door open. Key thing is they are just outside the full radius of the side of the doors to protect from trees, etc. (Ok door dings too!)

All Metal-tech 4x4 sliders come with a limited lifetime warranty. Here is a quick video on it:

USE code: MEMDAY23 10% off and flat $99 shipping to the lower 48! 4Door and 2Door FRAME mounted Bronco Sliders!

Hit save then come back to the link and sign back in again. I should then start to show how many entries you have as you click the options. Any issues persist hit me with a PM.

Since we build our parts all in house, we can make them as green as one wants, think there is over 30 different Cerakote Greens. The test ones we made are with the SQUATCH GREEN H-316. They look great.

Ah great question, I should have clarified. Thank you for pointing this out, I will also update the original post. When you sign up it will ask you for your "full name", just put in your forum username in this spot. Like this:

Metal-tech 4x4 wants to say thank you to everyone on the 6G board, so we are giving away a custom engraved Benchmade Mediator automatic knife. We will engrave your user name or name on the blade. You must be a registered member on 6G, when you sign up you need to put your exact user name in...

Great review! Thank you for the kind words and showing everything about them. Even the packaging how we ship them is great for others to see how we do it. Great review. Mark