Search results

I used the 1.5m (4.92ft) ARB steel braided hose - most ARB vendors carry it. I did a test routing using a flexible tape measure to estimate the size I needed - you should probably do the same based on your desired routing. I might have been able to get away with 1m with a more direct routing...

ARB support's response was as noted in my previous post: From ARB Support: "That rivet is no longer utilized while using the ARB compressor mount. The DCLM is relocated onto the compressor bracket and the OEM bracket is no longer needed." Others have installed the mount and not reported any...

Aman-Thanks for sharing your install - it was helpful. I just finished installing an ARB Twin with ARB Pressure Control. Some photos below. I did a few things differently - not better or worse, just different - hope this helps others. I wanted both an input and an output port on the vehicle...

For the ARB Twin, any thoughts/pros/cons of alternative mounting orientations of the compressor on the bracket? Installation manual shows electrical connections towards engine with air filters facing outside over the computer module. I've seen a few others mounted with electrical connections on...

I also have given up on the ARB mount. Uninstalled it and purchased the KR Off-Road mount. FYI The alternate DLCM position I previously proposed would not work for me due to too short DLCM cable length. ARB support's response to the unsupported wheel liner concern was: "That rivet is no longer...

Thanks for the response. I looked at the AAL tailgate mount - looks good, but in my case I want the twin compressor, with the option of adding the manifold, and I don't want it mounted inside the vehicle. IMO the ARB bracket addresses those requirements the best. I haven't found the ARB mount...

I'm in the midst of this installation on a 2.7L. I might be too late to help you, but maybe you can let me know what you ended up doing. For your question 1: The white clip and rubber plug that holds the clip to the body does in fact need to be relocated on my 2.7L. The instructions later say...

Having secured all of the parts, I'm planning to install the ARB mount in the coming weeks. ARB's mount design and build looks very robust, and I like where it positions the compressor vs. other vendor's designs. A few things I'm planning to do differently: 1) Omit the manifold and instead...

Thank you!

Thank you!

I'm looking for the dimensions of the bracket that comes with the ARB Remote Hose Coupling Kit (171314). Can someone please provide that? Can't seem to find it anywhere. Trying to see if it will work for my application. Looking for the 4 measurements in the photo below: L, H, T and F.

Finally took delivery today of 4dr Heritage, 2.7 auto, aux switches, tow pkg., Azure Gray Metallic July 2021 reservation holder for Badlands Changed to Heritage September 2022 8/28/23 Blend Date

I finally have it! July 2021 reservation holder for Badlands Changed to Heritage September 2022

Mine is at the dealer in final prep, scheduled to pick it up tomorrow.

FYI Ford online chat gave me my railcar number (it was TTGX followed by 6 numbers), and said it was on Canadian National Railway (I’m in Texas!?!). I tried tracking on CSX and UP and it gave an old location. However, when I tried Norfolk Southern, it gave me current tracking, and I was able to...

I am still waiting, but it arrived in town by rail late last week, and dealer said it should be ready to pickup this week.

Just ordered for a capable bumper

FYI I confirmed with online chat that mine is on a railcar, but the "cxservices" link still does not work. However, the https://www.windowsticker.forddirect.com/windowsticker.pdf?vin=xxxxxxxxxxxxxxxx link does work for me.

Thanks. When I manually created the link it worked for me. it appears to just be a problem with the link on the order status page.