Search results

Another option that won't block the fuses. $$$ though. https://thebracketbros.com/products/group-94-agm-bracket

I have a APL 55. I have not used it much yet, so far only one issue. It does not sit level. I was sent a second unit that also does not sit level. This was resolved by adding a additional rubber foot as a shim. I believe this is a manufacturing defect and that ICECO is aware of it. Not really a...

Let me repost without all the photos sent by mistake. Fits perfectly!

Props to them for making a tailgate slide that's compatible with cargo side Molle panels. It looks like it would work with the broaddict version I have and probably other brands as well. I have a few things from m2m and the quality is top tier.

I have the Anker version. It doesn’t reverse charge yet, they are supposed to release the update for that by spring. EDIT: The Bluetti charger 2 was not out when I pulled the trigger on my setup, or I might have gone a different route. I'm not unhappy though. The Anker charger is not as...

Part of the reason I chose the DV8 overhead Molle is because it is (in my opinion) a legitimate B brace. Some have had trouble with fitment, mine installed in about 30 minutes. Don't tighten anything until all bolts are in place. The back seat grab bar is a nice bonus...

Is there a airbag under that panel? I can't remember.

https://www.amazon.com/dp/B0FFZ4KTTM?ref=ppx_yo2ov_dt_b_fed_asin_title https://www.amazon.com/dp/B0FSSDPMMM?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Works great. The higher the voltage, the better the connection and the faster it connects.

I have a step up converter hard wired to a upfitter switch with a port mounted in my Molle panel. I can unplug from that and use the portable power supply. So, two sources of power. I’m aware that’s there is a 40 pound brick behind my head, not being secured is temporary. I wouldn’t go off-road...

I switch from the hardwired power port to an outlet on the power supply with a usb adapter. Right now the unit is just sitting on the shelf. I’ll tie it down or strap it eventually.

It does AGM.

I have recently added a couple of things wired direct to the battery that always draw a small amount of current. Plus my Bronco sits a lot and does mostly short trips. Not surprising that I started getting "system off" messages in Ford Pass. So, it was time to install a battery maintainer. The...

If you want to take it to the next level... https://motleyind.com/products/122-piece-ford-performance-tri-fold-tool-kit https://motleyind.com/products/motley-industries-premium-laser-cut-foam-organizer-trays-for-the-122-piece-ford-performance-tool-kit

Especially if you want a fridge/freezer combo unit, pay close attention to the interior dimension. The marketing photo's are very deceiving and it's incredibly difficult to see how much a electric cooler will actually hold. You definitely have to pay to play if you want something reasonably...

I really needed a good reason to stop wishing I had this product. Thank you for a great writeup.

I used the upfitter wire that’s run to the rear and tied it into switch one. (I’ll probably take it to an accessory circuit to free the switch up.) I have a portable power supply for when I want to run it when the Bronco is not running. The American Adventure Labs Starlink mount finally came...

I would be all excited about this if it was compatible with your cargo molle side panels. My cooler wouldn't fit under your cargo basket shelf either, so there's that too. if it's the same quality as your other products, it's very well built.

I used this. Looks like you have a different quick connect fitting? https://store.arbusa.com/hose-coupling-0740111/?srsltid=AfmBOoo3EYozVUbO3Cey8KC3afAeM-ELVsCGnNGAmOPX8A5_hF4bjh3SvuQ Also, so I did not have to drill a large hole...

I put Armorlite flooring in with a Soundskins sound deadening kit under it. Two days to install, and 3 days to recover. Everything had to come out.

I have the parts to do something just like this. How did you get power to the step up converter? Right now I have the dish on top of my overhead molle, but it doesn't connect very well there.