Sponsored

Search results

  1. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    I haven’t driven the car around yet. You’re thinking the small lights would trip the BLIS being mounted on the bumper?? I’m not sure. I saw a few people had their Baja designs small lights mounted on top. So I felt confident. I was gonna mount antenna also on the bumper. I tell ya what...

  2. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    The sub sounds pretty good. Gotta say. It literally fit so snug once I took the outter ring off. I put small foam tape on the bottom to seal the sub frame. Screwed it in with #8 course thread stainless flat head screws. I even took an old pillow apart to put poly stuffing inside. Did not...

  3. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    Here’s my next step. Sub mod. I got my kicker 8” sub in the mail. Used skinny screw driver to pry the side adhesion off. Then worked around with a bigger screwdriver. It literally fits perfectly. No drilling or cutting the BnO sub box. Gotta hook it all up. But impressed so far.

  4. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    Verifying the rear fog lights work after hooking it up. Got my extra basket to haul stuff to sites with. Coming along really nice. Adding trim paint to pretty much all frame surfaces just to increase the rust protection. Dielectric grease in all the connectors. I see most people just...

  5. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    Welp. Drove to a local Ford dealership to purchase the trailer tow kit from them since my package was extremely delayed in PA for no known reason. Took less than 30 mins to hook bolt this all up. While I was there. I painted an extra layer of SEM Trim paint over everything. And wire loomed...

  6. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    Boy. What are the chances of that huh? Loved being a CTO.

  7. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    The orange white wire is a preran non connected circuit. You can wire it to any aux switch that had same wire diameter / amp capacity

  8. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    I’m gonna wire in a custom led light in the rear.

  9. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    Yes. Once I swapped out the headlight switch that had front and rear fog light buttons. I turned on rear fogs in FORScan. And hooked it up to my rear lights now. Works great. Gotta have low amp draw. I think I’m less than 2 amps with both lights.

  10. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    Wired up the rear fog light wiring in the corner pocket drivers side. It’s works great! Turn the car ACC ON or start and run. Turn on lights at headlight switch and then push the rear fog button. ;)

  11. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    Yes. I tested it out the other day with a low voltage light tester. So change out the switch and turn on in FORScan.

  12. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    Adding my rear fog lights on the bumper. Found a small set that I’ve used on my Polaris Northstar. Lots of light. Intended to add more lighting off-road behind me. Backing up to trailers. Or at campsights. Simply taping into my rear fog light White/blue wire in the C424 connector.

  13. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    I actually think I want to leave it ported. I’m going to put boomat inside the box and then fill it with poly fill. But leave it ported.

  14. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    It’s like Tetris and legos.

  15. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    Yo!! Retired CTOC(SW/AW/NAC/IDW) here. Sup brotha! Flew in EP3Es and P3s.

  16. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    Removing the main cabin floor piece is very easy. 8 (10mm bolts under the plastic caps) and it’ll come out. The side pieces are def sticky to the wall with the pop out fasteners used. But I didn’t break anything. I removed the seat flap middle piece first after the floor. Then removed both...

  17. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

  18. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    Hey! I am still. Still waiting (ordered Mar 6th from fordmotorparts.com ) I have not received it yet. However. I looked up my FordPass and I could have used my points to help pay for it BUT the transaction mandated a $196 service fee and I’ve read here that some dealerships don’t accept that...

  19. Adding Rear Factory Hitch, adding boom mat (sound deadening), upgrading Sub

    Hey. I retired in Aug 2013 with 21 yrs 5 months 8 days. I was a CTOC (SW/AW/NAC/IDW) Chief , started out Cryptologic Tellicomunications Operator (a spook basically) for the first 13 years. Then I got forced converted to an ITC (Info Systems Tech) for the remainder. There was less than...

  20. Anyone try to make the rear seats recline further?

    Waiting for someone to just unbolt the rear seats all together. And mount two more front seats in the back with a center console. 🤔🤔🤔🤔🤔


Top