Search results

I am inquiring if anyone has information to the main connector under the drivers and passenger's seat. This would be for the 10-way +heated seats. Looking for the pinout, Thanks

Just a thought, is there any chance you have snow/ice on your bronco?

There is a relay for auxiliary power, connection. One possible reason for the fault: The fault could be could be present from a fault due to the wiring association with the module, specifically the lights. It being winter, do you have snow, water, debris buildup around the 7-pin connector...

It's taped up a little bit in the wiring loom. I had to pull it slightly more than I felt I needed to to get it free. I would not cut it because there's already very little extra wire to put a connector or splice onto it.

I can get non- ethanol gas when I get into rural counties. I get about 10 to 15% better mpg.

What's the ethanol percentage that you're putting in. You will get significant increase by using non-ethanol gas. Depending on where you live that may not be available.

If you're talking about the item at 517. That is the receiver for the wireless key fob. That has nothing to do with the actual tow module

Can you take a picture of what you're talking about/ what you have.

Get a Basic Tester on Amazon?

Out of curiosity do you have the lux package. Do you have 360 cameras, or blind spot. If you don't have those, those modules don't exist and you can't program them. Out of curiosity do you have the lux package? Do you have 360 cameras, or blind spot. If you don't have those, those modules...

Are you sure the part isn't actually:? M2DT-19H378-AB

Unsure what you want a Ford dealership to do for a Non-Ford product. There is no programming for a brake controller. It's literally a variable voltage output based on brake input. It's plug and Play The Ford dealership gave you correct response. What third party hardware was installed?

The pricing for what needs to be done does not make sense, It's truly not that hard of a thing. Removing the bumper I'm putting on the receiver is not hard, it could be done solo in 35 minutes. (That's what it took me with little preparation)

Question: are your doors unlocked, more importantly is your hood open?

Out of curiosity, do have LED or halogen lights?

What you're describing is a third party controller. You're tapping on two existing wiring. The issues described are wiring issues. Can offer guidance on the OEM /factory install. But that's not what you have here. It'd be hard to troubleshoot wiring without knowing what they did/pictures.

Electrical connections are single connections of different materials. Wire to lug, lug to stud /buss bar. These connection points generally get hotter then the rest of the matting material.. Soldier melts when heated. Soldier will melt before the materials it's connecting will. A mechanical...

Inline switch is kind of a user preference, depending on your actual setup, it's a good one to have. If You're losing amps amp loss on a switch you have the wrong switch.

If you have a question, pm me. I will get back to you this evening.

When you say it's definitely reading. C. That's true because that's before you changed the first value from a B to an F. The last two digits are a checksum For all intensive purposes, it's the mathematical sum of the module number, the address and all the data they're in. 1 + 2 + 3 = 6(The...