Search results

This is very cool. Did you run the power wires on the interior or exterior?

FYI: The 10 lb and 15 lb Power Tanks are the same diameter and are interchangeable in most mounts. The great thing about having two tanks is you always have one ready to go and don't have to scramble to get your main tank filled between trips.

Five years from the date of mfg or before the next fill after the five year mark. We guarantee it to pass inspection or we replace it for the lifetime of the bottle.

Thank you for the business!

See the latest prototype - our goal is to have it in production before Summer You got it! Dropdowns to add a bracket to the Bronco Plate have been added. https://powertank.com/products/bkt-2210

You can buy just the Bronco Plate which comes with the roll bar clamps or the roll bar clamps by themselves. ("Bronco6G" discount code applies) You can re-use the standard Super Bracket from any Power Tank package purchased previously. It is available through our dealers but it is up to them...

The top piece will slide in between the body and the hard top. No spacer needed.

You would have to ask Pro Eagle about that. We are not developing a bracket for a floor jack.

Update: The Two Door Power Tank mount is for sale! Use code "PTBronco" for 10% savings on the following SKUs: Mount by itself: https://powertank.com/products/bkt-2205 5 lb Power Tank Bronco 2dr Edition: https://powertank.com/products/5-lb-2-door-bronco-edition-power-tank 10 lb Power Tank...

Fixed, thanks for your business!

Great question! I've updated the original post.

I forgot to mention that it is not currently compatible with the BRaptor. Does any one want to donate a Raptor to us for development? Currently, we are waiting for the cross-brace to become available as a bolt-on to our non-Raptor so we can develop a Raptor solution. At this point, it is...

Yes, any tank with 6.9" dia should work. Where do you want the extra holes to be located? For an Element FE, you should have no problem installing the Quick Fists where our billet QR mount would go. On the right side of this picture which is showing a passenger side mount - front of vehicle...

Way ahead of you! These all use a Package B as a base and adds the Bronco Plate. The bundle includes a complete Power Tank system, Super Flex Hose, Upgraded Super Coupler, Bracketry, Ventoso HD Tire Inflator with case, and a new Carbon Regulator Cover. Lmtd lifetime warranty on the bottle...

I'm not the one to ask but it's going to be a lot more involved than just making mounts and cutouts for the shifter. All new vehicles are so complex in terms of electronics that physically fitting the new heart is the easy part. Getting it to play nice with the rest of the vehicle without...

If you're already swapping the Coyote, I don't see why a Tremec, also from a Mustang, would be very difficult. I'd be satisfied with a 6+1 spd behind the 2.7 or 3.0, really.

Thanks for sharing these pictures. Our final mount will look similar to this in terms of Power Tank placement. Also, it will be driver side only because it would end up blocking the light and the storage pocket on the passenger side. We have made cutouts to be able to access the hard top wiring...

The clamps won't slide down. I wouldn't hesitate to mount a Power Tank to an Ultra4 Race Car using our mount. It's a clearance issue. There is not enough space to mount a Power Tank on a 2 door roll bar with the speaker pod attached. The roll bar profile is actually different between the 2...

Noted. The original plan was to roll bar mount the Power Tank like our 4 door version but with the speaker pod, there is not enough room on the roll bar. Would you be willing to sacrifice the speaker pod for a Power Tank?

Check out our Bronco Plate mounting system! Developed to mount a 5 lb, 10 lb, or 15 lb Power Tank securely in the back of your Bronco, it also works to mount 5 lb to 11 lb propane tanks. In addition to a Power Tank or propane tank, there are pre-drilled holes to mount a quick-release fire...