Search results

That is a good idea. I checked the driver side during installation but didn't check passenger side. Driver side was correct. I'll double check tomorrow. And further testing.. 1. FM does not sound good--very "tinny". 2. Streaming music definitely better than FM but depends on the song. So...

Hi. I'm not sure the speaker upgrade is worth it but need other opinions. So just changed out all speakers (non B&O) to 4" front/rear and 6.75" kick--all Kicker KSC series. The clarity definitely improved but the highs in front, especially the dash, seem really high. Adjusting treble has minimal...

Hi. Just wanted to follow up on the original question a year later. Right now have OEM factory sub and amp in my 2door. I am considering several options: 1. Keep factory amp but replace factory subwoofer with Kicker 6.75" 2. Upgrade amp to Kicker 500.1 with Kicker 6.75" 3. Upgrade amp to...

Got it thanks!

Good grief! Ok I'll pull it from the factory amplifier using a PnP harness probably. Thank you !

Great thanks for the extra idea! Also do we know if you can grab high level outputs from the factory sub harness (non B&O) for the 500.1 ?

Great thanks for the reply!

So if I remove my non B&O sub amp from the factory enclosure and replace it with the Kicker 500.1, the signal input is LOW level from the factory harness and not high level. Does that sound correct? Thanks!

Great thanks. I wonder if I could make such a plate and then glue the plate to the subwoofer enclosure? Then attach the amp to the plate using four screws. What material did you use for the plate--not that familiar with 3d printing. Thank you.

Hello. Looking to install the Kicker 500.1 amp into the existing subwoofer enclosure in my 2 door Bronco base. This would replace the existing factory amp. Is there a bracket I can purchase that would allow me to remove the factory amp and replace with the Kicker? Thanks!

That sounds like a good idea too. Sorry where does the distribution block get installed? Not exactly sure how that works. Thank you.

Hi. I plan to install Kicker 200.4 amp. It was advised to run power wire to battery for best performance. Then planning on install of Kicker 500.1 sub amp which also requires direct battery connection. So that means I need to run TWO separate power wires to battery--is that correct? Thanks!

Nice thank you! Yes I just smashed it down with my hand and there appears to be nothing underneath.

Great thanks for the clarification. So is there a way to install an amplifier under the front seat if it's just an empty space?

Saw this really old post but I have this exact same question. Possibly looking to mount a small powered sub under either front driver or passenger seat but there's this unknown hump. 2025 2-door. Does anyone know the purpose of this carpeted hump?? Thanks!

Ok I decided to try this method using a 1/4" spacer and seems to work well without any trimming of the rubber bumper so far. New tire without any spacer worked but those rubber spacers were really squished. Then used a 1/4" spacer and they're still squished a bit but definitely better. Trial...

Ok that's a smart idea too thanks. I wonder if they can be painted or plastidip maybe black to blend in or do you really notice it with the spare on?

Great thanks for the advice!

Hello. I will be upgrading my the stock wheels and tires (255/70R16) on 2025 2door base to takeoff Black Diamond aluminum wheels and 265/70R17 tires. Reading alot about possibly needing to modify the black rubber spacers that press against the spare tire. Both wheels have the same +55 offset...