Search results

Manufacturer of slide says 449 pounds for the pair. I only tested 200. The weakness would be the aluminum angle and minimal bolts I used to support the wood plank.

Parts list Plywood 4’x4’x3/4” 4x4 douglas fir x 8’ long https://www.lowes.com/pd/4-in-x-4-in-x-8-ft-Douglas-Fir-Lumber-Common-3-437-in-x-3-437-in-x-7-937-ft-Actual/1000028817 2 each of 48” long x 12” x 1” thick pine stair treads...

Here’s a video of what I came up with. Next post will have instructions and parts list.

Right. They use the same mounts as the factory rock rails.

The brackets are correct. Not sure about the bolts and nuts they have listed as the size is not noted there. I only had to buy 4 of the M10 flange bolt because their kit already included every bolts, washer, and nut needed for attaching the rail to the mounts. Are they including the parts...

Will be there Jan 21st. Not worried at all about the temps or weather. Looking forward to it!

The ones pictured are for a four door. I don’t know what comes with the zroadz steps for a 2 door, nor the mounts used on a factory 2 door rock slider.

Great job! I‘ll bet it was fun with the snow and wet. Pretty tight squeeze for a body under there as well! I bet you could sell the front skid and the plate behind it pretty easily since so many people will have the plastic stock ones.

Surprisingly, the mounts came in today and bolted up without problems. The two middle mounts are different from each other, and the two rear mounts have a left and right. You’ll also need to pick up four M10 flange bolts to mount them. I think they were 25mm long. Local hardware store had...

I understand your frustration. I don’t have the part numbers but my Ford parts guy was able to look them up when I said to look for the mounts to a 4 door rock rail. When I get them I will share the part numbers. Zroadz issued me a refund of $115, which is what I’ll have spent for the mounts...

They look great! Just so others know that may be looking at a set, they will not bolt onto your Bronco unless you have the factory mounts that come with the rock rails (or possibly the factory side steps, not sure how those mount.). I received mine last Saturday, and only have a base model...

Sorry, my use of the word strap is probably confusing. A few pages of instructions will come with it, but there are currently 2 steel straps or brackets that hold up the gas tank now on your Bronco. The brackets are each held up with one bolt on each side. The brackets need to be removed and...

I got it a few months ago from Ruxer Parts when it was around $600 shipped. Priced have gone up a bit since then since shipping is expensive for it. It shows about $700 now. https://www.ruxerparts.com/oem-parts/ford-kit-skid-plate-mb3z5d032e Part # for a 4 door is MB3Z-5D032-E

I just installed the oem skid plates on my Base with SAS and I don’t have the modular bumper either. To fit the front skid plate, I had to cut off the tow hooks for the front lip of the plate to sit flush with that mount. I was fine with cutting them off since they were useless with the...

Was in the same predicament as many of you with build date of 10-18. It sat with no updates and then it finally shipped end of November and showed up at dealer on Dec 9th. Trackers updated after I took delivery on Friday. I’m still pissed at Ford for screwing the rest of you still waiting...

Nice job, OP! I just installed the exact same set-up on my Base 4-Door with SAS, except I have the bull bar on the bumper as well. With my crap scale the bumper was 110 lbs and winch another 70 or so if I’m remembering correctly. Definitely a hunk of weight on the end, but it doesn’t look...

Sent! Maybe it will open their eyes a bit, but have my doubts.

Front skid plate came with the kit I received a while back.

Well, I did get en email today with a pic of it coming off the assembly line. It’s progress anyway. One thing I’ll never understand is how Ford can figure out how to link that pic to my email, but cannot give an update of why I was waiting and the rest of the stragglers in these threads are...

I was in the same situation as OP and many others that have waited much longer with no answers. I was a 10-18 blend and it was in production until a few days ago. This morning I just got a shipped notification and trackers updated. No idea what the hold up was, as it was just a base build...