Search results

Our mount utilizes the same bolt pattern as many of the tailgate reinforcements on the market. That being said, we do not recommend using our products in conjunction with any other aftermarket accessories because we have not tested it in that configuration

The In-wheel Accessory Mount and Air Chuck Mount will work with all Factory wheels except: 1. Everglades 2. Steel wheels

At this time this mount only fits the twin compressor.

Here is a picture of the Filter Relocation Kit installed on the backside of the Modular Tailgate Pass-Through. Can not show it installed because it is hidden inside the tailgate. Yes, exactly. The Modular Tailgate Pass-Throughs we ship out will be injection molded with a UV resistant...

The ARB compressor is sealed for moisture and dust resistance, and has IP55 waterproof/dustproof fans. When using the Modular Tailgate Pass-Through and supplied cord grip, weather/moisture is not an issue. When using the optional Filter Relocation Kit, the air intake is routed to the interior...

We had similar concerns when developing this product, so we reached out to ARB to get their opinion. Attached is a screenshot of their response. We recommend using the Expedition Essentials Extended wire harness that ARB recommended. The harness we made for testing purposes was built to the...

Through our extensive testing, there have been no negative effects on the tailgate due to the added weight.

A tailgate table installed on the interior of the tailgate will not be affected by the filter relocation kit or Modular Tailgate Pass-Through. It will need to be removed to complete wiring, but can be reinstalled without an issue. The Modular Tailgate Pass-Through with the Filter Relocation...

Yes, install video is in the works and will be available before shipments take place.

Thanks for the feedback, we will add a detailed wiring diagram with the instructions.

The wiring harness goes from the compressor through our Modular Tailgate Pass-Through, giving you a water tight seal. From there, it is routed through the hinge using the factory wire loom to the interior of the vehicle (where the factory subwoofer is located). This is where you will need to...

We assume it will bolt up but do not recommend using any of our products in conjunction with other after market accessories because we have not tested it in that configuration.

The vertical slot in the top left is a mounting point for future products like an antenna etc.

This model does not fit Bronco Raptor but we are currently working on a version that does.

The mount spaces the compressor away from the cabin vents enough to not affect the movement of the flaps. Even with the Modular Tailgate Pass-Through installed there was no noticeable changes in cabin pressure relief. We can not guarantee fitment of the air chuck on all aftermarket wheels, but...

Thanks for the question. To wire the compressors on our test vehicles, all we did was extended the harness supplied by ARB to reach the batteries under the hood. The easiest way we found to use the factory Upfitter switches and not the ARB toggle switch is to utilize the pre-ran wire located in...

Introducing our newly designed ARB Twin Compressor mount- the best way to mount your ARB Twin Compressor to your Bronco. Using the AGS Off-Road Air-Gate Kit, make use of wasted space on your vehicle and easily mount your compressor inside of the spare tire carrier. Keep your compressor away...

Pre-orders now live! Check out our new post HERE. All details available at AGS Off-Road

Here at AGS Off-Road, we are happy to announce that our first line of products is available for pre-order! Pre-order is up now until December 1st, and we expect to start shipping orders by December 31st. Supplies are limited, so act fast! The AGS Off-Road Air-Gate Kit includes everything you...

Yes, the tailgate reinforcement with integrated mount will be a bit behind the basic mount, but not too far off. We hope to offer pre-orders for the tailgate reinforcement as soon as the basic mounts start shipping. -AGS Off-Road