Search results

For those interested, just put 4WP side steps on my 2 Door. Can be done by yourself, would recommend help (hard to get the thing lined up and get bolts started on your own, lots to juggle). Are they real sliders: No, not really, they are body mounted--pinch weld and a couple other places. Do...

I put together a mount for 17mm ball from Amazon: Picatinny mount to Go Pro fingers: Amazon.com: Picatinny Rails Airsoft Gun Rail Mounts Bracket Adapter for GoPro Action Camera (Black) : Sports & Outdoors Go Pro to 1/4-20 Stud (with adjuster nut so you can get the direction right)...

I got the 15" version (medium).

I don't know if you could tuck it in. I did not try, I was afraid to break that part of the wheel trying to pry it up. It did not seem to me to be something that would lift up. If you go this way, set aside some time to work on it. I think that a contrasting stitching on the leather would help...

A Few, hopefully better, pictures Straight On: The biggest questionable areas are the bottom of the wheel and the swells at 2 and 10. The leather does not quite meet (not expected on a universal part), so the stitching has to stretch across a bit. The finger swell at 10:00: The bottom of...

Yes, I have the switches and floor liners, which is pretty much all the options, LOL.

Yes, only one is a Base Squatch, but there you go.

I agree, this is my 5th set (Xterra, Escape, Mazda3, Frontier, now Bronco). This is the first without the zipper pockets, as they were sold out when I ordered (I assume a supply chain issue there), and also the first with graphics, and I am pretty happy with those.

I think it is a bit thinner than some, it did stretch a bit when installing. If you go this way, a sunny warm day is your friend, it takes a while, and everything is hard to see (black thread, black leather, black plastic, dark interior, even out in the sun, etc)

Best I have right now, If I remember, I can take a better on sometime when the sun is up (this is from earlier)

Total was a shade over $300 for the front row (console cover included). There are a ton of options, so YMMV: Sunglass pockets for the side of the seatbacks, a couple of formats for pockets on the backs of the seats, utility pockets for the front of the seat base, added inflateable lumbar...

Got the T-bolts (and the D tie down plates) installed. I mainly wanted the T bolts as a tie down location for a couple of things, just to hold some gear bags that I usually keep in the vehicle (some tools, jumper cables, etc) While I agree with one of the previous posters that the D plates...

OK, got my Wet Okole Neoprene Seat covers in and installed (took about 6 weeks to get them, this is pretty standard, they have to custom make them when you order them). They did not (when I ordered) have a pattern for the rear seats of the 2 Door, i assume this will be fixed later, but I pretty...

2 door, which was one of the drivers for the rarity, seems to be a low take rate, but probably higher in the first year or so than ever again.

Base, Sasquatch, Rapid Read, 2 door, with Auxiliary Switches, Modular bumper, safari bar, floor liners. With the competition, right after I brought her home. Since then: Tint: 50% Fronts, 15% Backs PPF on Fenders, Hood (front 16") and rockers Lug locks Expel tread film on door sills GPCA quick...

All I can say is 2.3 auto, sasquatch has no shortage of oomph in my book. I have been taking it pretty easy on the throttle for break in, and it gets around just fine. It's not a sports car, but it is quicker than my last several vehicles, so there's that.

I have a 4cyl base, Sasquatch, 2 door, auto, and I am getting about 16 to 17 mpg over the first 1100 miles. This is the mileage at the pump, not the dash (which is about 1.5 mpg higher).

Rear cargo area sides (2 door for me, but I assume that 4 door would be the bigger seller). Seat back panels for those of us without BD or BL trim Maybe console sides, or inside the console lid/armrest

OP: Don't want to hijack, but can you get a measurement for those steps? Basically, I am looking for either how far down the step surface is from the door lip (or the floor, either one, although the floor is a fair bit above the door lip), or how far off the ground the step surface is (I know...

Put me in!