Bronco SAS more comfortable with little to no lift?

[BroncosInTheWild]

I would like to make my bronco more comfortable for road driving (Road trips and daily driver) but i couldn't find good shocks/suspension upgrades with little to no lift as I don't want to mess with the balance of the car.

ICONs stage 1 upgrade are the only ones i came across with 0" lift but according to youtube they aren't much of an upgrade, I would like to get FOX's but it seems they would add at least 2"

Would appreciate any suggestions

Badlands 4drs SAS 2021

Sponsored

 

[Silver-Bolt]

How about the factory HOSS 3.0 from the Wildtrak?

 

[BroncosInTheWild]

How about the factory HOSS 3.0 from the Wildtrak?

If it's for sale no doubt, have you seen it anywhere? Thanks in advance

 

[Silver-Bolt]

If it's for sale no doubt, have you seen it anywhere? Thanks in advance

https://parts.lakelandford.com/a/Fo...nt-suspension-Shocks--components/ML21360.html

 

[Lak34ers]

I would like to make my bronco more comfortable for road driving (Road trips and daily driver) but i couldn't find good shocks/suspension upgrades with little to no lift as I don't want to mess with the balance of the car.

ICONs stage 1 upgrade are the only ones i came across with 0" lift but according to youtube they aren't much of an upgrade, I would like to get FOX's but it seems they would add at least 2"

Would appreciate any suggestions

Badlands 4drs SAS 2021

Look at Bilstein 5100s and 6100s. They have height adjustability if you want or not. I did 6100s which leveled it and it rides better than SAS. I have 5100s on my F150 and it drives amazing as well.

 

[Strizzo]

https://parts.lakelandford.com/a/Fo...nt-suspension-Shocks--components/ML21360.html

Are the springs the same between the hoss 2.0 and 3.0? could you just buy the shocks and swap your springs over?

 

[Silver-Bolt]

Are the springs the same between the hoss 2.0 and 3.0? could you just buy the shocks and swap your springs over?

That I don't know. You will have to compare the spring P/N's to determine that for certain.

 

[Strizzo]

That I don't know. You will have to compare the spring P/N's to determine that for certain.

It doesn’t look like there are different p/n for the hoss 3.0 equipped versions is why I asked. I’ll do some more digging, but looks like a $2k total cost if it’s just the shocks and you can reuse the springs and mounts. The fox rears do use a different bump stop.

 

[Strizzo]

It looks based on the work of @Ducati1098 and @flip that spring rates are more dependent on trim and options than anything else. After reading through these two threads I think it would probably be ok to reuse the oem springs since they would be tailored to the vehicles specific options.

https://www.bronco6g.com/forum/threads/need-vins-for-suspension-ids.28448/

https://www.bronco6g.com/forum/thre...dtrak-brought-home-today-photos.47884/page-11

 

[Midnight_Blue]

It doesn’t look like there are different p/n for the hoss 3.0 equipped versions is why I asked. I’ll do some more digging, but looks like a $2k total cost if it’s just the shocks and you can reuse the springs and mounts. The fox rears do use a different bump stop.

How did this go?

So weird how few options there are for quality shocks with no lift. This should be more popular as a lot of Broncos are now at their shock replacement interval and I can’t imagine that everyone wants a brodozer.

 

[8rent]

If it's for sale no doubt, have you seen it anywhere? Thanks in advance

It is back in stock. Just got it and put it on. Love the ride.

 

[Neps]

Bilstein 8112's will give you an improved ride and no lift, although they are not inexpensive.

 

[ducksface]

For a better ride:
Drop your tire pressure to something more reasonable than the door tag says.
It's free.

Tire longevity is a hobby, not a necessity.

Sponsored