NEW EZ4x4 GIVEAWAY – Win a Free Set of Aluminum Tube Doors ($1,000+ Value)

[doubleabeepbeep]

If anyone is looking for some great tube doors EZ is the ticket for sure. Amazing customer service, Brian and Victoria are fantastic. The doors also arrived in 3-4 days packaged amazingly! Ordered just the lower solid molly panels for what I was looking for, I think they complement my build perfectly, but I am biased lol.

First things first, these doors look kickass on your ride.

Do you have any feedback on these doors after running them for a while? Would you say the latch is as good as the factory doors? Is the tube diameter similar to the Ford tube doors?

Also, I know how to pronounce Boerne. Class of 93' over here.

Sponsored

 

[HOSSMAN]

First things first, these doors look kickass on your ride.

Do you have any feedback on these doors after running them for a while? Would you say the latch is as good as the factory doors? Is the tube diameter similar to the Ford tube doors?

Also, I know how to pronounce Boerne. Class of 93' over here.

Thanks, appreciate it! This things become my fair weather weekend vehicle so I don't drive it every day to give real world experiences but the more I drive around with them the more complements I get for sure, definitely helps set it apart and much better looking than most of anything out there including Ford's doors. Tubing is big and beefy, latch is solid and molly panels give it a nice finishing touch. Only thing I did not do was line my molly panels with the flock/felt type tape, to me they are tight enough they don't rattle but keep in mind with all the wind and road noise you wouldn't notice it really anyway.

Only thing that is a little "ehh" was the hardware to attach to the doors. You really can't use the factory door bolts like it suggests to do (or did with me) so they were quick to send me longer bolts for the doors to mount them properly. But all in all a great company to work with and very responsive to calls and texts.

One thing I did to keep the install clean was I cut off the nylon straps that attach to the door latches, you pull on them to pop the latch, didn't care for that. It's too easy to just reach your hand through the opening and open the latch on the inside.

So you got to grow up listening to people not from here call it "Born" and all sorts of interesting spellings lol! Small world for sure! Not sure where you are at now but I've been here 10 years now, work for Ford of Boerne as the service director (was Jennings Anderson Ford). Stop in and say hello if you are ever back in town, not so little anymore unfortunately/fortunately.

 

[doubleabeepbeep]

Thanks, appreciate it! This things become my fair weather weekend vehicle so I don't drive it every day to give real world experiences but the more I drive around with them the more complements I get for sure, definitely helps set it apart and much better looking than most of anything out there including Ford's doors. Tubing is big and beefy, latch is solid and molly panels give it a nice finishing touch. Only thing I did not do was line my molly panels with the flock/felt type tape, to me they are tight enough they don't rattle but keep in mind with all the wind and road noise you wouldn't notice it really anyway.

Only thing that is a little "ehh" was the hardware to attach to the doors. You really can't use the factory door bolts like it suggests to do (or did with me) so they were quick to send me longer bolts for the doors to mount them properly. But all in all a great company to work with and very responsive to calls and texts.

One thing I did to keep the install clean was I cut off the nylon straps that attach to the door latches, you pull on them to pop the latch, didn't care for that. It's too easy to just reach your hand through the opening and open the latch on the inside.

So you got to grow up listening to people not from here call it "Born" and all sorts of interesting spellings lol! Small world for sure! Not sure where you are at now but I've been here 10 years now, work for Ford of Boerne as the service director (was Jennings Anderson Ford). Stop in and say hello if you are ever back in town, not so little anymore unfortunately/fortunately.

That's some good info, makes me think they designed these to be used with their door alignment kit. Sounds like they should just throw those in with the doors! I messaged them on their page and got a response that they are 2 inch tubes that are 2mm thick. I think I might have to pull the trigger on them.

I was a cave guide out at Cascade Caverns for while so I have heard some rather interesting versions of Boerne. I am up in Georgetown these days, but I do make it back occasionally to see family. That town is grown like crazy, I drove out to the lake a few years back in my old F150 hoping to find some wheelin' spots from 'back in the day'. No luck though.

 

[bigdedition]

EZ4x4 Here and no Brian is not gone.... We did have challenges here back at the office and we are happy to say that the winner is:: @Jazer - Jessica from NC!!!! We will reach out to her directly and we look forward to when she installs her new Alpha Doors on her Bronco!!!!

Congrats!

 

[JDinNC]

EZ4x4 Here and no Brian is not gone.... We did have challenges here back at the office and we are happy to say that the winner is:: @Jazer - Jessica from NC!!!! We will reach out to her directly and we look forward to when she installs her new Alpha Doors on her Bronco!!!!

Gratz!

 

[keester]

any plans to make panels that cover the full door hole for rainy weather that attach to the tube doors/

@EZ4X4 any plans to make a door upper attachment or some sort of soft door for rain?

 

[pillar406]

Hey Bronco 6G!
We’re back with another awesome giveaway! This time we’re giving one lucky member a full set of our EZ4x4 Alpha Aluminum Tube Doors + All Weather Panel Kit (Over $1,000 value!)

This setup is the ultimate combination of open-air freedom and all-weather protection. Run the tube doors for full trail visibility and airflow, then snap on the panel kit when you need to shield against wind, rain, or debris. Built tough from lightweight aluminum and designed specifically for your 6th Gen Bronco.

How to Enter:
Comment Below – Tell us your thoughts on the Alpha Doors + All Weather Panels
Winner will be announced (June 2, 2025)

Don’t miss your chance to win this premium setup for FREE!

Good luck, and we can’t wait to see how you’d rock our Alpha Tube Doors on your build!

Want to check it out now?

• Alpha Tube Doors
• All Weather Panel Kit

If you see anything else you like in the meantime, feel free to use BRONCO6G15 at checkout for 15% off your purchase!

I like the look of them. They seem strong and the fact that you can do either a full open air or cover up is pretty handy. I like going open air but I am worried about getting an obscene amount of mud on the inside. Definitely worth it to pick these up

Sponsored