Tharberats's latest activity

Morning! Currently planning a road trip up to RMNP and Pikes Peak from Albuquerque, and was wondering if any of you locals have...

Quickest way with minimal effort will be to connect the red wire’s eye terminal to the battery, ground the black wire’s eye terminal...

Ha, My bad! It’s what happens when you wake up at 3am and decide to get on the forum🥱 This forum has been too addictive while waiting...

If it was 1 light, that would be correct. Each light has a 48 watt rating, so it doubles up to 8A on that circuit.

Apparently my 50% comments weren't making sense, what I meant was to have the circuit rated for 150% of the load (a 50% safety margin)...

My recommendation is to have no more than 80% of the fuse-rated amperage on a circuit. You can go with 50%, but it's a little overkill...

I run my ditch lights on AUX 6, light bar on AUX 5,, amber fog lights on AUX 4 and rear bumper light cubes on AUX 3...no issues with any...

As someone who just ordered a winch today, this is some very useful info. I was thinking of wiring a cutoff under the hood, but this is...

Those have been the aux amp ratings since the first Broncos rolled off the production line at MAP in May/June of 2021. The numbers from...

The 50% safety margin is just another way for me to make sure my amateur electrician skills don't make mistakes. Yes, since apparently...

Well, some people hang enough pods on their roof light bar to propell the Bronco backwards from the light pressure alone, in which case...

I wouldn't say I'm annoyed by it. I ran a 500amp solenoid to switch 6 for my winch, so my switch only pulls 1 or less Amp to hold it...

Also it definitely slipped my mind. Perusing the selection of wires and relays currently, so I'll probably go that route.

I was just curious. I find them to be so handy once I get the wiring right 😂

Nothing better than hearing you boys coming over the horizon to lay waste. Can't say I'd trade places with you either. Stay safe, brother.

I actually wired them individually. Driver's side on #2 Passenger side on #4 Gives me more control and uses less amperage.

Nice, I got mad respect for you ground pounders. I have 0 desire to do what you do, hence why I fly helicopters for the USAF. Also...

I was an RO with the Infantry during my first enlistment (OIF 1 & OEF) and quickly said fuck that shit... Re-upped to become a...

Only that I haven't ordered one yet? I did a large capacity heavy duty marine solenoid for my winch, and that went pretty easy.

For future reference for anyone also looking, this is the current chart for a 2023 Badlands Sasquatch. Bschurr, thanks for the heads-up!

That’s an old chart - Aux 4 through 6 have been upgraded to 10amps each so you can use any Aux connection for an 8amp load and it will...

That's a solid mentality to have when the alternative is a fire. If I we're doing this install I would use the 15 amp switch to play it...

With this being the response, clearly I have not lol. I'll go check it out, thanks

Ugh, a commo guy? At least you fixed them, not dealt with the crypto. Those people can be the worst. Me? I just break them/report them...

While I want to believe you, do you know where I could find that new chart? Obviously it is an older chart posted back in 2021, but this...

Yeah, I'm a huge fan of a 50% or better safety margin, especially when it comes to things that can make my life real bad if it fails.

You are correct. It’s best to give yourself a little headspace when dealing with electrical components, if you don’t plan on adding too...

I just used the modcrate floorboard, and built my own, saved probably a grand that way depends on which ones, most do look cheap. I...

To start off, I'm not an electrician: I know enough to be dangerous. To that end, I'm looking to I stall a pair of ditch lights, each...

The service person I talked to in the phone called it APIM. Another user in a different thread just said they had that updated and then...

Briguy good luck! Hopefully it fixes it! I guess I'll add that to my stop when I go get a fluid swap and tire rotation later this week

Like an over the air update or one they have to physically push via cable? Either way, I am stoked!

I used to have an issue where any calls I placed via Bluetooth would give me 0 noise or audible tones until I hung up and called again...

Briguy, that sounds exactly like what mine is doing as well, just with Android auto. And yeah, all I have found is that there is no...

Nah, seems to be pretty systemic regardless of mods. Which is rather disappointing