Sponsored
Phil B's latest activity
-
This thread is going places. -
Phil B replied to the thread 4 years in, finally see a crack in hardtop!.You made me go look. Not quite 38 months, garaged, 14,000 miles. Guess what. Cracks that were not there 2 months ago when it was still...
-
Phil B replied to the thread Bronco Plug and play 1150W RMS amp replacement kit for B&O back in stock!.If a person already has the K2, and wanted to upgrade to the zenpower unit, I'm assuming the power and ground cables could be reused...
-
Phil B posted the thread No problems with my backup camera. Then they did the recall replacement... in Issues, Repairs, Warranty, TSB, Recalls.I somewhat reluctantly allowed my dealer to to the recall replacement on my rear camera. They called me and offered to do it my my...
-
Phil B replied to the thread Need a battery recommendation..I'll be replacing my battery soon and I've been considering this. Not sure I want to spend that much money on a battery. I have some low...
-
Phil B replied to the thread Bronco6G Daily Thank-You Deal #3 | Rear Window MOLLE Storage System — $209 Down to $104.50.The brackets that mount behind the small plastic trim panels will have to be changed. They use mounting holes in the roll bar at the...
-
Phil B replied to the thread Bronco6G Daily Thank-You Deal #3 | Rear Window MOLLE Storage System — $209 Down to $104.50.This is a great deal. Mine installed easily and does not squeak or rattle even after a subwoofer upgrade. I've had them in and out...
-
-
Phil B replied to the thread Your Ideal Camera Placements? Share Your Thoughts.I like the main camera in the rear view mirror. That's the one for collecting evidence. I originally had the rear camera on the roll...
-
-
Phil B replied to the thread Ford offering Navigation after trial - is it worth it?.The only thing I ever used was the weather radar. I do miss that. But I'm not paying for another subscription. Grateful there's not a...
-
Phil B replied to the thread Need advice on antenna and power routing..Mountains to Metal...
-
Phil B reacted to Charlie Mike's post in the thread Easy way to add rocker switches to supplement upfitter switches with
Like.
That is good to know. I ran a cable extension for my Midland radio up to the DV8 molle panel. It didn't click into place, but it fits... -
Phil B posted the thread Easy way to add rocker switches to supplement upfitter switches in Electronics, Electrical, Software, AUX, Audio, Nav, SYNC, FordPass, Trail App, Comms, Cameras.I discovered that a standard rocker switch will snap right into a molle panel. Now I have switches that are powered when the key is off...
-
-
Phil B replied to the thread Armorlite Floor Drain Plug Issue.One of mine would not stay closed, I figured out I had it inserted too far into the hole.
-
Phil B reacted to HalfmuleFarmer's post in the thread If you could get rid of one ownership headache, what would it be? with Like.
My loan payment.
-
Phil B replied to the thread [New Product Launch] Broaddict Overhead MOLLE Panel System—Your Bronco’s Most Useful Space May Be Over Your Head.Adding the USB ports is genius and something no other product has. How do they connect to power?
-
Phil B replied to the thread Another Sta-Bar Disconnect Saga.There is a opportunity to produce a aftermarket product for all the units that don't have the disconnect. If I remember correctly, there...
-
Phil B replied to the thread Auxiliary switches to work full time.https://www.bronco6g.com/forum/threads/akturbos-dirty-betty-build-icon-rims-installed.41802/post-1416970
-
Phil B replied to the thread Installing the Perimeter Alarm Plus — DIY How-To Writeup.Other than lock/unlock, just disabling the shock sensor. You are correct that it should be armed when you lock the car. I like having...
-
-
@SierraBronco
-
Phil B replied to the thread Installing the Perimeter Alarm Plus — DIY How-To Writeup.I just finished installing this. My experience: No one is joking about how hard it is to unplug the wiring harness. You can feel it...
-
Phil B replied to the thread Removing Lux Carpet/Replacing with Armorlite?.Not true. The only thing that didn't fit was the trim caps for the rear seat posts. Otherwise, it all works. It was a tight fit, and...
-
Phil B replied to the thread Removing Lux Carpet/Replacing with Armorlite?.I used a precut kit and it fit nicely around the drains. The deadening material is waterproof and water won't be able to get underneath...
-
-
Phil B replied to the thread Removing Lux Carpet/Replacing with Armorlite?.Consider sound deadening along with Armorlite. It’s not a waterproof liner, you can’t use high volume water flow or it wil get...
-
Phil B replied to the thread Cargo Protection Setup.Maybett seatback protector and Broaddict molle panels
-
-
Phil B replied to the thread Under hood accessory mounting platforms.Not me, just shared this for the other entrepreneurs in the group. I've been considering their battery mount for a solenoid disconnect...
-
Phil B posted the thread Under hood accessory mounting platforms in Electronics, Electrical, Software, AUX, Audio, Nav, SYNC, FordPass, Trail App, Comms, Cameras.I posted this company a while back. Either I missed it, or they have expanded their product line and now have mounting platforms for...
-
-
Phil B replied to the thread FYI - Mobridge amp users.What AI did you use to do this?
-
Phil B replied to the thread Need advice on antenna and power routing..Something to consider. You can mount the radio on top of the overhead molle, and mount the head below. This allows you to route the...
-
-
Phil B replied to the thread Easy and inexpensive battery maintainer / charger UPDATED.UPDATE: I have a few very low power draw devices running 24/7 and the 2D was not keeping my Bronco from going to sleep. (I also suspect...
-
-
Phil B replied to the thread Keep It Like New.If you don't already know, PPF - Paint Protection Film. A full wrap would be covering the entire vehicle. You can also cover just the...
-
I'm gonna be a bit contrarian I love the look of a nice truck. And I don't go out of my way to demolish things. But as soon as I gave...
-
Phil B replied to the thread Keep It Like New.Mine will be 3 years old in 2 weeks and still looks great. The very first things I added were mudflaps and PPF on the leading edges and...
-
-
Phil B reacted to CalvinT's post in the thread Using factory pre-run wires for always-hot accessory power (bypassing upfitter switches)? with Like.
Look through the threads for retrofitting the factory upfitter switches. Someone talks about doing the modification. I think there are...
-
Phil B replied to the thread Using factory pre-run wires for always-hot accessory power (bypassing upfitter switches)?.If I remember right, it involves running a hot wire to the upfitters and a little reconfiguration. I've been looking for a new project...
-
Phil B replied to the thread Using factory pre-run wires for always-hot accessory power (bypassing upfitter switches)?.I used the upfitter wires to the passenger side rear to connect a step up power converter for my starlink. I really wish there was an...
-
@mObridge - Awesome Job! I recently updated the firmware and see the new features for our amps Specifically, the "rear fill" and the...
-
To simplify for folks mudding through this and getting confused or getting misled. FACT: HOSS 3.0 works just fine with Turn portals...
