Sponsored
NC_Oak's latest activity
-
NC_Oak replied to the thread Turn Off-road White hard top question.ask turn directly - great customer service. they might be able to match it up for you and share a photo. different vendor, but solo...
-
NC_Oak replied to the thread Gravel farm road.order good PPF and take a door off. practice it. it isn't hard, but it is a skill. I have not done PPF on the bronco but the panel...
-
NC_Oak replied to the thread Exploded Steering Rack.gunna follow this one to see how 3.0 rack replacement programming goes now a days
-
NC_Oak replied to the thread Ford Pass App - Bronco stuck in Tennessee.you know a few days ago mine didn't start via the app, just spun and spun. HAven't tried yet since. I'll give it a go when I'm back at...
-
NC_Oak replied to the thread Undercarriage minor rust preventive action.this is very much not concerning but I get you want to fix it. I have a few spots from wheeling that happen every year and I have some...
-
NC_Oak replied to the thread Turn Offroad Portals.roll tide
-
NC_Oak replied to the thread SOFT TOP CONVERSION- what do I need by looking at this picture?.They're occasionally listed on this site
-
NC_Oak replied to the thread IAG Rock Armor Engine Skid Plate with Oil Pan Access on 2026 4-dr 2.3L manual.perfect - now go mess it up
-
NC_Oak replied to the thread Turn Offroad Portals.krispy kreme and bojangles!
-
NC_Oak replied to the thread Turn Offroad Portals.only the yeast donuts are - but I only accept yeast donuts as donuts. cake donuts are imposters
-
NC_Oak replied to the thread Turn Offroad Portals.totally got your assumption, was just putting it out there that a 2" baguette will not exceed the yield or tensile strength of 1" steel...
-
NC_Oak replied to the thread Turn Offroad Portals.guessing different materials were used between the FP and the icons.
-
NC_Oak replied to the thread Turn Offroad Portals.anything specific that broke it on the trail?
-
NC_Oak replied to the thread Turn Offroad Portals.I'm waiting on mine to ship, so have looked at the photos a few times. They've updated the page a few times since they went live, and...
-
NC_Oak replied to the thread Turn Offroad Portals.The wheel flange appears to be 20CrMnTi
-
NC_Oak replied to the thread Looking for rubber plugs.I'd trace it to make it easier to measure. then google oval rubber plugs. you'll get plenty of places to source it
-
NC_Oak replied to the thread Turn Offroad Portals.
-
NC_Oak replied to the thread Turn Offroad Portals.
-
NC_Oak replied to the thread Door honk after installing doors.That connector will get smashed up if not actually connected
-
NC_Oak replied to the thread Door honk after installing doors.would absolutely use forscan on a lease. they can easily reflash it if they even care to check. they 100% more care about scratches.
-
NC_Oak replied to the thread Colonial Ford Marlborough Ma.they didn't even shrink the heat shrink tubing. I'd blow them up with an online review. you'd be surprised nowadays how effective that...
-
NC_Oak replied to the thread 37x13.5 on stock tailgate temporarily.plenty of other options out there too for tailgate reinforcement
-
NC_Oak replied to the thread Adding Hero Switches for Aftermarket Lockers.hero switches are too close together. I only use the front and rear lockers out of those switches anyways. But I think the front and...
-
NC_Oak replied to the thread IAG Rock Armor Engine Skid Plate with Oil Pan Access on 2026 4-dr 2.3L manual.First - I love my IAG skids. Note that they fit so that the bottom surface aligns to be flat across all the skids (hence skidding...)...
-
NC_Oak replied to the thread CLANK NOISE from around left front.of course it is hard to tell from the video but it sounds pretty obvious and NOT faint. Jack it up and use a separate jack to...
-
NC_Oak replied to the thread Door Panel Replacement is slightly different than the original, looking for advice.not sure which part of the door skin you mean, hard to tell from photos. But if your concern is simply matching, I'd ask them to order...
-
NC_Oak replied to the thread 5 tire rotation is no joke!.so I'll add to the "rotate your tires" crew - my rears tend to lose some tread lugs from wheeling at a higher rate than the fronts...
-
NC_Oak replied to the thread Lower ball joint nuts missing or fell off??.I like to use this stuff on bolts that really matter
-
-
NC_Oak replied to the thread 5 tire rotation is no joke!.having done tire rotations one an 8-lugger most of my life, without an impact gun. the bronco is nothing. I still prefer to do this...
-
NC_Oak replied to the thread 5 tire rotation is no joke!.cordless impact and a hydraulic jack make this pretty easy work. 2 beer job
-
NC_Oak replied to the thread Does anyone use a pulley system to remove their soft top?.left and right hand, and whatever close enough to adult is around
-
NC_Oak replied to the thread Suparee Hyper 5" LED pod lights review.really just feel aux lights need to be round due to nostalgia and the fact that the bronco's headlights are round
-
NC_Oak replied to the thread Soft Top storage bags.the IAG bag is great - bought it early in ownership and love it. Had a couple bronco buddies but the same as a result. Protects the...
-
NC_Oak replied to the thread Dinged up bash plates -- how to prevent rust.if you really feel you must hit em with something now, I wouldnt take em off. Just climb under there and do your best. Assume...
-
NC_Oak replied to the thread Dinged up bash plates -- how to prevent rust.I take mine (3/16" steel) off each winter and touch them up. sometimes a little sanding if needed (the big gouges) and / or some rust...
-
NC_Oak replied to the thread *Update June 13th Uwharrie Trip.I'm out on the 13th - heading to Mill Spring that weekend. Next time!
-
NC_Oak replied to the thread *Update June 13th Uwharrie Trip.That's a great line up. MAny hours on the trails! You'll be in good company and dutch john is a great trail. dicky bell is really...
-
NC_Oak replied to the thread *Update June 13th Uwharrie Trip.dutch john has a trenched area that looks a little intimidating but is very passable, when descending it gets a little off camber and...
-
NC_Oak replied to the thread *Update June 13th Uwharrie Trip.not sure what everyone is running but dickey bell is absolutely doable without a spotter, with lockers. I may be down to head there...
-
NC_Oak replied to the thread G/D DAMN '25 2.3 Filter.i have a 2024 2.3L. I use an evacutor to get as much oil out as you can (for yall that know it certainly is not all of it). I drain...
-
NC_Oak replied to the thread New but no to old to learn.my rear recovery hook (still have the plastic bumper on the rear) has seen its shared of being dragged on a rock. If I had a hitch...
-
NC_Oak replied to the thread Help me pick the color of my first Bronco!.this is factual
-
NC_Oak replied to the thread Newbie Offroad question. Maximum horizontal inclination?.CalvinT's clip above is where I'm cautious. When the ass gets light on a descent, and the weight of the motor pulls down into a drop...
-
NC_Oak replied to the thread Spare CV Axle Questions.under the rear seat storage is a great spot for stuff. all my trail gear is on a shelf in my garage. I just toss it all in the cargo...
-
NC_Oak replied to the thread Spare CV Axle Questions.at the bottom of this thread you'll see posts with blown CVs, diff issues, et cetera. If you want a warm fuzzy feeling: you've got...
-
NC_Oak replied to the thread Spare CV Axle Questions.I wish the wolf box would let us download different formats off the memory card via a card reader. forgot which but I need to pay I...
-
NC_Oak replied to the thread Spare CV Axle Questions.shhhhh - I'm probably heading out tomorrow...
-
NC_Oak replied to the thread First off-road trip = strange noise.maybe sounds like a heat shield rattling when it happens the second time in your clip. i usually want to blame skid plates for noises...
-
NC_Oak replied to the thread Solomotorsports UCA double shear mounts installed.digging up this old thread - @mattusmc what do the solo's look like on the driver side? the brake lines seem to be directly in the way...
-
NC_Oak replied to the thread Bronco Dimensions Card for Parking Garage.what's wrong with head out the window looking up for clearance? only the coolest of the cool do that.
