Recent content by LAX-DAD

Thanks for the kind words. Amp racks were custom made, welded steel utilizing factory mounting points. Corrections one rivet nut for each mount was added. I am sure they can be resized if necessary. Audiocontrol LC 1.800 sub amp is included to power sub. Second mount was set up for...

Custom Tailgate subwoofer enclosure (unfinished painted to playing with interior colors) with Rockford Fosgate T1S2-12" subwoofer and AudioControl LC-1.800 amplifier and bass knob. This is a direct fit setup with steel mounts for Both Audiocontrol and Audison AF C8.14bit (not included)...

Attached are how I mounted the Ciare HWG150 in the kick panel. Photo in earlier post is mount awaiting foam around speaker to seal and keep rattles off panel and grill. Haven’t gotten there yet. In the four attached you will see the ring removed, 8-32 bolts thread into rigid mount that I...

I made them myself. Made emplate out of mdf and then trace via router with HDPE. I also install brass thread inserts. I’ll break the parts down for you when I take them apart during my testing. Happy to help if you need something made. Always enjoy some garage therapy.

Great to hear your results. Bronco’s have much to be desired audio and limited workability for those of trying to maximize audio with its constraints. Fun toy none the less.

Sorry for the delay, red eye and jet lagged. Attached is picture assembled. I intend to tune with and without fill see what I find. I will provide pictures of mount disassembled for reference during the process. I am really liking the Ciare HWG, clean precise and take what I give them...

I used 1/2” HDPE. Rigid considering there anre only use 3 factory mounting location and easy to router and cut. I’ve found pvc soft and flexible. For my install I added 3 rivet nuts in addition to the 3 factory mounting locations to make as solid as I could.

I’ve had no issues with depth and any of the 6-1/2” speakers mounted in the kick-panel location. Made 1/2” thick HDPE mounting adapter along with 1/2”top ring around speaker sandwiching the speaker between the two HDPE pieces. On an airplane but will be happy to take pictures if interested...

Late to the conversation but wanted to share my experience for what it's worth. Main issue has to do with airspace in the kick panel of the bronco as to why hard to get decent midbass. Car speakers are predominantly designed to work in larger door cavity. FYI, attached photo of passenger...

My experience with dsp systems is limited to only the AudioControl and Audison. The AudioControl is simple strait forward and now includes new EQ features that many have complained was lacking. My criticism would be more personal in line with bland DOS like graphics for those of us old enough...

You are more than correct; the audio signal varies greatly from the acoustical. I contemplated hooking up the microphone to do just that, but we've all seen those numbers from others. My objective was to share the electrical in hopes to help those curious with the frequencies fed to each...

Thank you was unaware it was adjustable the audio out voltage was adjustable. Regarding the audio signal am I correct in assuming it is flat and one less step in the dsp tuning process?

The clipping test I performed was a matter of curiosity based on the system design. Head unit powering center dash and rear pods while back panel amp front dash corners, kick panels and sub. As mentioned in my original post sub signal was the only channel to clip. If you have the B&O I am...

Broncos experience knows no age. Daughter and I both have a Bronco and jumped at the opportunity to go to the Texas Rodeo with her. Good times don’t hesitate. Enjoyed time at the resort as well not to mention one on one with her. She gained some great confidence as well.

My amp is semi-out. Relocated while building my amp rack. Hope these dimensions help.