Sponsored
JohnGalt's latest activity
-
JohnGalt replied to the thread Jack recommendation for Bronco Raptor.@MDrums first pic… its about 11.75” to the shock mount on the LCA and 14” gets me about an inch off the ground. Note I have 38” tires... -
-
JohnGalt reacted to timhood's post in the thread Bronco Raptors Being Taken for Granite - Near Bald Mountain with
Haha.
I really hope being taken for granite was tongue-in-cheek. But you have to add a wink emoji or make it granite or something to let... -
JohnGalt replied to the thread Bronco Raptors Being Taken for Granite - Near Bald Mountain.;-)
-
JohnGalt reacted to userdude's post in the thread Bronco Raptors Being Taken for Granite - Near Bald Mountain with Like.
When y'all are at the guard shack waiting to get into Bald Mountain, are y'all like "Toupee or not toupee?" 🤔
-
JohnGalt replied to the thread Jack recommendation for Bronco Raptor.I’ve been using a Power Mountain TallBoy and a jack pad lately. It’s got a large stable base, attachments to get enough height safely...
-
JohnGalt posted the thread Bronco Raptors Being Taken for Granite - Near Bald Mountain in 🦖 Bronco Raptor Forum.Short segment of a trip to Bald Mountain area in Sierras. This is a cool little spur that took us for fun loop with great views On the...
-
JohnGalt replied to the thread Upgraded Bronco Raptor Bump Stops (3D Printed)!!.Thank you for your contribution to Science!
-
JohnGalt reacted to Spooled's post in the thread Upgraded Bronco Raptor Bump Stops (3D Printed)!! with Like.
So, I ran a short course 3 times and there's a jump at the end that you can definitely overcook. I've ran this course before so I know...
-
JohnGalt reacted to Spooled's post in the thread Upgraded Bronco Raptor Bump Stops (3D Printed)!! with Like.
I just installed a set of the front bumps. I'm jumping it Saturday so they will get put to use quickly.
-
JohnGalt reacted to MongoTheBronco's post in the thread Upgraded Bronco Raptor Bump Stops (3D Printed)!! with Like.
These bump stops have been awesome, and I’m grateful to have been selected as one of the test candidates. Its important to say I am not...
-
JohnGalt replied to the thread Upgraded Bronco Raptor Bump Stops (3D Printed)!!.Probably doesn’t answer your questions, but click the link in the OP, or this...
-
JohnGalt reacted to Sherpa11's post in the thread Upgraded Bronco Raptor Bump Stops (3D Printed)!! with Like.
nice but these seem outrageously overpriced
-
JohnGalt reacted to TheLawnDart's post in the thread Upgraded Bronco Raptor Bump Stops (3D Printed)!! with Like.
Sorry I’m late to this! I drove through mud and sand specifically to see if I could get the holes to clog. I also drove into a door-deep...
-
JohnGalt reacted to dougcjohn's post in the thread Upgraded Bronco Raptor Bump Stops (3D Printed)!! with Like.
You’re a step in ft of me. I did go to website and saw the hollow valve compression… Little bitty holes! I wonder how snow & ice will...
-
JohnGalt replied to the thread Upgraded Bronco Raptor Bump Stops (3D Printed)!!.Definitely interesting, check out the website in the link in OP. spoiler alert: it’s hollow inside and appears to rely on “valving” (...
-
JohnGalt reacted to SierraBronco's post in the thread 74WELD Steering Rack Clunking - Check Yours! with Like.
Yeah I need to tear it apart and see what’s up. I’m being lazy though.
-
JohnGalt replied to the thread 74WELD Steering Rack Clunking - Check Yours!.I’ve got my 74 weld rack sitting in a garage cabinet. Just can’t summon the courage to rebuild it and put it back in. its broken...
-
JohnGalt replied to the thread Shock recalibration Info after 2 inch install needed…..Sorry to hear that but good to know! I could imagine breaking the ride height linkage on the trail could also throw it into a fit...
-
JohnGalt replied to the thread Shock recalibration Info after 2 inch install needed…..a couple comments JIC on the Forscan ride height calibration, but I think this is all in the Forscan instructions as you work through...
-
JohnGalt reacted to vrtical's post in the thread Shock recalibration Info after 2 inch install needed…. with Like.
I really should check mine just to see for reference... I will come back and update this since I am running collars only on OEM springs...
-
JohnGalt reacted to Breptar's post in the thread Shock recalibration Info after 2 inch install needed…. with Like.
I’m in the valley and might be able to help you with forscan. Shoot me a DM
-
JohnGalt reacted to NorthShoreBronco's post in the thread Another Sta-Bar Disconnect Saga with Like.
Ok, so I spent some time this morning going through all the wiring diagrams and pintpoint tests and think I have it figured out...
-
JohnGalt replied to the thread Wolfbox HyperFlow X 12V Twin Motor On-Board Air Compressor install.You mean mounted like this? My ADD panel has held this for two years through a lot of terrain with no issue. I’ve seen other window...
-
-
JohnGalt reacted to RK Racing's post in the thread Shock recalibration Info after 2 inch install needed…. with Like.
Thank you very much for that info. If you’re ever in my hood. (LAX Airport Area) I owe you some tacos and beer!……………… the reply above...
-
JohnGalt replied to the thread Shock recalibration Info after 2 inch install needed…..FWIW. Open AI summary on the topic…. AI never guaranteed to be 100% correct, but relatively objective overview. Q: What are the...
-
JohnGalt replied to the thread Shock recalibration Info after 2 inch install needed…..I was able to confirm the ride height was out of range on mine by reading the PIDs for the ride height values for all four corners using...
-
JohnGalt reacted to Spooled's post in the thread Shock recalibration Info after 2 inch install needed…. with Like.
When you add springs, your base ride height changes. The piston inside the shock is at a different position. The ride height sensor...
-
JohnGalt replied to the thread Shock recalibration Info after 2 inch install needed…..I’ve had a different experience…. Most noticeable as it “chattered” on rough pavement after adding Hyperco 2”/1” springs. I performed a...
-
JohnGalt reacted to swamp2's post in the thread Pros/Cons for Hyperco Lift Springs vs. Foutz Lift Collars for 1-2” lift? with Like.
Ride height calibration is for the damper (shock) and can not affect static ride height. It's just not physically possible. It is solely...
-
JohnGalt replied to the thread Pros/Cons for Hyperco Lift Springs vs. Foutz Lift Collars for 1-2” lift?.Not sure if it’ll make a difference, but have you recalibrated ride height since servicing the shocks? If not, good to do and may...
-
JohnGalt replied to the thread My only rant about my 2026 Bronco Raptor - no electric seat memory!.Electric seats? With memory? Next you’ll be saying they should put carpet in them.
-
JohnGalt reacted to MGF's post in the thread My only rant about my 2026 Bronco Raptor - no electric seat memory! with Like.
I’d be happy with Raptor seats with manual settings. No need for power.
