Sponsored
JL8jeff's latest activity
-
JL8jeff replied to the thread Used Bronco search.If you're skipping the 7 MT, I would look for a 2 dr v6 2021-24. The base Sas is a great combo with the v6 but that might run the price... -
-
JL8jeff replied to the thread Used Bronco search.If you're willing to travel a little this one meets your needs, 2022 base, 7MT, 37K miles for $30K. Marketplace - 2022 Ford Bronco ·...
-
JL8jeff replied to the thread Two Door Tuesday Lets See Them Two Doors.Something strange popped up in my FB feed today. -
-
JL8jeff replied to the thread Sanity Check: 2025 Big Bend on 35s — Bilstein 5100s (2.0"/2.5"), Stock Wheels, & BFG KO2s (Load C).You may want to look for a set of Sasquatch takeoff wheels/tires locally. Just make sure they still have the tpms sensors and it should...
-
JL8jeff replied to the thread Which is best way to improve stance?.You will get some debris hitting the side of the truck, even with mudflaps (unless you get the really long flaps). I have 37's now so...
-
JL8jeff replied to the thread Which is best way to improve stance?.Here's my 2023 base Sas with 17x9 -6 offset wheels with 35x12.5x17 tires with stock lift. Are you looking for more poke than this?
-
-
JL8jeff replied to the thread Which is best way to improve stance?.Go with a 0 to +12 offset wheel with a different brand tire. You'll save weight with the aftermarket wheels and you can sell your stock...
-
-
JL8jeff replied to the thread Procal Tune versions changes.I'm guessing the mods that help airflow result in lower boost numbers because you're already pushing a lot more air. I have similar...
-
JL8jeff replied to the thread 1” Lift Kit.Did you schedule an alignment before your trip, you definitely want to get that done after a lift.
-
JL8jeff replied to the thread Procal Tune versions changes.I installed the Procal tune on my 23 2.7 Sas back in Nov 2024. ASS is disabled with that original tune install. I was looking at my...
-
-
JL8jeff replied to the thread Anyone using S&B CAI with Procal 2.7?.I saw this S&B for the 2.7 pop up locally for sale on FB Marketplace. So I guess they are out there. The main thing I don't like about...
-
JL8jeff replied to the thread Thinking about trading in Badlands non Sasquatch..I think the Badlands has the 4.46 gears so going to Sas to get 4.7 gears isn't that big of a change and most likely not worth the $$$...
-
JL8jeff replied to the thread Going back to stock exhaust questions..It looks like he needs the stock intermediate pipe and muffler/tailpipe. If you buy new Ford Oem stuff it will be pricey so I would...
-
JL8jeff replied to the thread Lift Kit recommendations for 2 Door Sasquatch Big Bend.You probably want to get rid of the stock Bilsteins begore they go bad anyway so I'd do coilovers for the lift. I went with the ProComp...
-
-
JL8jeff replied to the thread Seat Cover Options - Cosmetic + Functional.I have the RC seat covers over my 2 dr base Sas cloth seats. I think they are neoprene. They fit pretty snug and no problems so far...
-
-
JL8jeff replied to the thread 2.7 Oil Catch Can / Air Oil Separator.I run the Corsa and it catches enough to justify having it. I think this was around 3K miles of driving over the previous year.
-
-
JL8jeff replied to the thread Question about loose (floppy) window.I think this is what you're looking for:
-
JL8jeff replied to the thread Need help from the Bronco collective to see what my Bronco is worth!?.If you're planning on getting a truck from a dealer, definitely take into account the sales tax on the trade in value. Like mentioned...
-
JL8jeff replied to the thread E load vs C load tires - what's your pick?.I had E rated 35" KM3's for about 1-1/2 years and you could tell they were stiff but I've gotten used to E rated tires the last 20 years...
-
JL8jeff replied to the thread Anyone using S&B CAI with Procal 2.7?.Still sluggish with the Procal? Mine jumps pretty good in normal mode with it, I don't use sport, it's too jumpy. I also added a GPE...
-
JL8jeff replied to the thread Anyone using S&B CAI with Procal 2.7?.It's tough to say. I did the Procal and Mishimoto stuff at the same time and already had a Corsa airbox with a larger filter. So...
-
JL8jeff replied to the thread Anyone using S&B CAI with Procal 2.7?.Is the S&B even available for the 2.7 yet? When I was looking, it was always out of stock. I ended up getting the CVF intake and run...
-
JL8jeff replied to the thread Two Door Tuesday Lets See Them Two Doors.I forgot I had the top sitting on the EZ4x4 lift in the garage and because of the darkness, I walked right into it! :curse: That's gonna...
-
-
JL8jeff replied to the thread New Jersey New OEM Bronco door bags for 2 dr, EZ4x4 thumbscrews and EZ4x4 door pins.These are for the 2 door Bronco so it's left and right. The 4 door bags are a different part #. -
JL8jeff replied to the thread Recall 26S55: 2021-2026 Bronco - Engine Compartment Wiring Harness Repair [July 23, 2026] -- 590,000k units affected.I noticed a couple of wires wrapped in cloth tape going to a connecter next to the radiator overflow bottle. That section is right up...
-
-
JL8jeff posted the thread New Jersey Sold: New OEM Bronco door bags for 2 dr, EZ4x4 thumbscrews and EZ4x4 door pins in Exterior Parts.I have a pair of them oem Ford door bags for the 2 dr Bronco (M2DB X46079 AC) still in the plastic $125. A set of the EZ4x4 thumbscrews...
-
-
JL8jeff replied to the thread Painted hard top update.I don't think you can buy one directly from Ford (thought I read that here somewhere) so you would have to find a used one or new takeoff.
-
JL8jeff replied to the thread Is the JKS max clearance kit always necessary for 37 tires?.No, I haven't done any trails so I can't comment on that. When I had 35" KM3's (on stocl suspension) they would rub on the front...
-
JL8jeff replied to the thread Rough Shifts since oil change.Is there any chance you could have bumped a wire going to the transmission? One of the older GM trucks I had the previous owner had a...
-
JL8jeff replied to the thread Is the JKS max clearance kit always necessary for 37 tires?.You may want to look into aftermarket wheels which will give you the better offset (+12 to -6 works well) and reduce the weight compared...
-
-
JL8jeff replied to the thread How to run Method 703s on a Bronco?? (also BORA spacers).I would never consider putting a thin wheel spacer like 5mm between the hub and wheel, it's like a washer that can work it's way loose...
-
-
JL8jeff replied to the thread Two Door Tuesday Lets See Them Two Doors.It's rainy 2 door Tuesday. We need the rain, so I'm not complaining.
-
-
JL8jeff replied to the thread Really, How good are 4wp/pro comp 2.5” coilovers??.Post a picture of what you have, I did my install 14 months ago so I don't really recall. The bolt do look like they are smaller though.
-
JL8jeff replied to the thread New Jersey WTB: Turbosmart plumb back BOV.bump -
JL8jeff replied to the thread Went with the polished look for wheels..I went with the wheels that were priced decently, were in stock at the time and they had a 10% off coupon. I needed them right away as...
-
-
JL8jeff replied to the thread TIRE SIZE - 315's or 285's on a 2-door bronco?.Are you talking about wheel spacers to push the wheel/tire out or a spacer lift to gain 2" of height? I don't think you don't want 2"...
-
JL8jeff replied to the thread Village Idiot needs help with 37s.You may want to look at some adjustble coilovers so you can dial in the height the way you want it. I went with the ProComp adj...
-
-
JL8jeff replied to the thread Which wheel width and offset for 37s?.Yes, 37x12.5x17. The BFG KO2's tend to run a little smaller so I haven't had any rubbing.
-
-
JL8jeff replied to the thread Which wheel width and offset for 37s?.I have 17x9 with -6 and I don't think you want to go farther out, probably in a little so I suggest the 17x9 with 0 offset.
-
