Sponsored
itwelder's latest activity
-
itwelder replied to the thread Limit Top Gear - Progressive Range Selection - Does it work for you?.Ya that makes sense. Dang it now I gotta put another checkmark in the "wrong" column. -
itwelder replied to the thread Limit Top Gear - Progressive Range Selection - Does it work for you?.Unless I'm reading it wrong (which I probably am), it seems to say that it's for the Raptor. "Using Progressive Range...
-
itwelder reacted to mdainsd's post in the thread As a Bronco Owner, What’s Your Breaking Point? with
Like.
None of them give me the slightest concern. -
itwelder replied to the thread ICON High Clearance Crash Bar Kit.Have these been crash tested? Or at least put through a computer simulation? Even if they look nice, if they are not designed correctly...
-
itwelder replied to the thread Window Switches on Doors - Relocate / Duplicate - 2 Door.Where are the rear doors on a 2dr? I looked for them on mine but no luck finding them....
-
itwelder replied to the thread Clutch & Cylinder Failed at less than 900 miles. Dealer denied warranty claim.It sure looks like one side of the clutch disk is completely gone, while the other side has friction material. That tells me it's not...
-
-
I was in Tennessee this week. And when I saw him across the field, I knew right then and there, it was my long lost Father. It was great... -
itwelder replied to the thread Sorry - but I have a MIC top vs. Painted top question for someone who has had Both..I never said they were quiet, I was just answering a question. You're way off topic.
-
itwelder replied to the thread Sasquatch HOSS 2.0 Coilover Tear-Down - Travel, Spring Length, Bump Stop Info.Gas pressure in the shock has almost zero effect on spring rate and is just a static force, so can just be subtracted from sprung...
-
itwelder replied to the thread Sorry - but I have a MIC top vs. Painted top question for someone who has had Both..Yes, I tested with GY RTs and BFG KO2s. That was one of the things I was testing. It's not the tires.
-
itwelder replied to the thread Sorry - but I have a MIC top vs. Painted top question for someone who has had Both..Oh also (afterthought) I had a 2025 Base 4dr also, with MIC top. Drove that for about 3 months, traded it for the 2 dr - who needs all...
-
itwelder replied to the thread Sorry - but I have a MIC top vs. Painted top question for someone who has had Both..I currently have both, painted on a 2025 Badlands and MIC on a 2025 base. The Base with the MIC is hands-down quieter, not just...
-
itwelder replied to the thread Unsolvable Automatic Window Issue (SOLVED w/ FORScan).Had this exact thing happen the other day. I was able to inch the window up to the close position, making sure I didn't click all the...
-
itwelder replied to the thread Who hasn't had any cracks with their hardtops?.2025 Base, 2dr. Parked outside 24/7, although only about 6 months old.
-
itwelder replied to the thread 2025 2.3L Ford Performance Tune.Does anyone know if the 49-state tune for '25 can technically be applied to a CA vehicle? Is there any data in the computer that...
-
itwelder replied to the thread Sasquatch HOSS 2.0 Coilover Tear-Down - Travel, Spring Length, Bump Stop Info.I know it's messy, but if it were me, I would pull that inboard boot and inspect it at full droop and compression. At droop, the rollers...
-
itwelder replied to the thread 2026 2.3L Oil Chute Missing? [SOLVED].Weird. I was just looking for the part number for this piece like 30 minutes ago.... I'm going to modify one with magnets so that I can...
-
itwelder replied to the thread Sasquatch HOSS 2.0 Coilover Tear-Down - Travel, Spring Length, Bump Stop Info.Hey Chris, was just going to mention that. They might have that uncompressable bump stop there to prevent the CV from going outside its...