Sponsored
GreyZ's latest activity
-
GreyZ replied to the thread NEW Hammer Built High Clearance Hidden Winch.This is the exact reason when I built mine that the fairlead mount has no bends and is also tied into the lateral plate the winch sits... -
GreyZ replied to the thread 1 inch rear sag.I struggle to believe that you are being realistic with the added weight. The bare top is 30 lbs more. If you have any of the...
-
GreyZ replied to the thread Door Skin Adhesive Failure - Hollow Sound When Closing.This is interesting. First time I have seen this mentioned, but one of my doors has always sounded different than the other three when...
-
@Snacktime ☝ Edit: Just so there's a link to the actual product page...
-
GreyZ replied to the thread Another Sta-Bar Disconnect Saga.https://shop.app/products/10240994115906/bronco-sway-bar-disconnect-override Something like this intrigues me. I wish there was more...
-
GreyZ replied to the thread Gas mileage question.I have a 4 door 2.7 badlands non-Sas. Leveled (+1 front, -.5 rear) with the stock 33s and the tracked lifetime average is 18.0. The...
-
GreyZ replied to the thread BRBN Bronco Billet Upper Control Arms- Specs + Options.Do you have more info on the castor correction. From what to what at different lift heights? What lift height and tire size are these...
-
GreyZ replied to the thread Steering rack bushings cheap options and alternatives. Reviews pending!.Got it modeled up. Test print shows identical dims to .001. I have no interest in selling these due to the legal issues, but will link...
-
-
GreyZ reacted to mdainsd's post in the thread Recall 26S35: 2025-2026 Bronco 2.3L Engine Assembly Replacement [May 28, 2026] with
Like.
Glad I got a 2.7. -
GreyZ replied to the thread Has anyone installed the CVF high mount intercooler on a 2.3?.If I recall it is the same intercooler as the wagner, and it came with an adapter and instructions. I think you have to trim one of the...
-
GreyZ replied to the thread Product to raise rear view mirror height..Mostly out of curiosity sake, but is your seat lowered as low as possible?
-
GreyZ replied to the thread CVF High Mount Intercooler install and testing.Whats your plan for closing that huge gap in the fan shroud to radiator?
-
GreyZ replied to the thread Coilovers - changing springs to effect ride height..Remind me if you have a rear sway bar?
-
GreyZ reacted to Snacktime's post in the thread Coilovers - changing springs to effect ride height. with Like.
Got to do a little more testing yesterday and going to stick it out with the 600lb fronts and 200lb rears. For me the swap to 200lbs...
-
GreyZ replied to the thread 2025 Bronco Badlands - Suspension / Wheel & Tire Build advise requested.I have modified my non-sas badlands with a very similar approach in mind. I did the 4wp coilovers to gain some travel, but I actually...
-
GreyZ reacted to PWillette's post in the thread Steering rack bushings cheap options and alternatives. Reviews pending! with Like.
👍Found 'em. Shoot me DM
-
GreyZ replied to the thread Steering rack bushings cheap options and alternatives. Reviews pending!.Did you ever find these? Still looking for some to CAD.
-
GreyZ replied to the thread Clutch & Cylinder Failed at less than 900 miles. Dealer denied warranty claim.A southbend kit + slave is less than 2k for better than OEM quality. At the very least I wouldn't put the oem clutch back in over a...
-
GreyZ replied to the thread Clutch & Cylinder Failed at less than 900 miles. Dealer denied warranty claim.This is the most absurd part here. That is INSANE for a clutch and slave R+R. Do they have a break down of that price. You could...
-
GreyZ reacted to BadlandsA51's post in the thread Clutch & Cylinder Failed at less than 900 miles. Dealer denied warranty claim with Like.
It looks like the lining is gone from one side of the clutch. That is usually caused by accidentally shifting into the wrong gear...
-
GreyZ reacted to 5GENIDN's post in the thread NEW Hammer Built High Clearance Hidden Winch with Like.
Thant makes sense... I went with the Mishimoto... I will second on the accurate drill bit size for a rivnut.... As an additional note...
-
GreyZ replied to the thread NEW Hammer Built High Clearance Hidden Winch.I needed it for the wagner intercooler install. You can do it without, but the quality of the rivnut install is much better with a...
-
I seen earlier where someone asked if this would work with the Raptor and the reply was that mods for the intercooler were being looked...
-
GreyZ replied to the thread Do I need to air down for Shafer Trail?.Recently spent a few days in moab and did shafer, along with top of the world, hells revenege, fins, tower arch etc. We ran 18 psi the...
-
GreyZ replied to the thread Clutch & Cylinder Failed at less than 900 miles. Dealer denied warranty claim.I tend to agree here. I have ridden with people that are "well seasoned in manual" and be amazed at how much they ride the clutch and...
-
GreyZ replied to the thread Clutch & Cylinder Failed at less than 900 miles. Dealer denied warranty claim.Did they add more info. Was it overheat? overspeed? I think there is some consideration here if the slave failed and leaked and you...
