- First Name
- Ken
- Joined
- Nov 15, 2020
- Threads
- 26
- Messages
- 928
- Reaction score
- 1,169
- Location
- Richmond, VA
- Vehicle(s)
- '06 Jeep Commander
- Your Bronco Model
- Wildtrak
I used to work for a tier 3 supplier that sold plastic resin to injection molders. When I look at the degradation/ your location (Phoenix) I wonder whether UV stabilization is the issue. Looking at Webasto's website, It looks like their experience is with sunroofs and retractable hard tops. An MIC hardtop is bombarded with direct UV directly--- no tinted glass to reflect radiation. A plastic part needs to either reflect the direct sunlight or have heavy UV stabilization. Often with a black/gray part this stabilization is achieved with a heavy loading of carbon black pigment. I have seen the MIC at my dealer. It does look lighter than the Jeeps parked in my neighborhood.![]()
![]()
Updated photo from this AM. My hands aren't Samsquatch in real life, that's just the zoom level. You can see the fuzzy look on the edge, and that wasn't there when I picked it up 5 days ago. You REALLY have to be looking for it though.
Bad news, folks. This is a MIC 2.0 top built 10/1, delivered 4 days ago.
Top looked excellent at pickup. Did not notice any issues.. 4 days later, I notice I can see the old issue returning. Have not notified Ford yet.
Check your MIC tops CLOSELY on the rearmost panel by the windows. Appears to be pulling apart a bit.
I'll have a lot more photos and any other misc info coming shortly.
There is also slight honeycombing.
Edited for brevity.
Updated with some photos posted later in thread by @AJ_West_
![]()
![]()
![]()
![]()
![]()
Sponsored