Bad news about MIC 2.0 quality after a few days

[cowman]

been banned for life from twitter about 5 times already... can't even use my phone for twitter (they know they ip address); If you have truthful information to educate people, I can guarantee that Jack Dorsey will not permit you to spread this truth... so you will be banned.

Delete your Twitter App.... and start over new name new email... should bypass....

Sponsored

 

[Bronco4lyfe85]

Where has one actually disintegrated? So the edges have some roughness to them; what does that actually mean? Do you actually know that the rough edges are going to be problematic long term? Do you know that rough edges are not within the design limits of the top once it is in full-rate production? Everyone here is assuming the top design is crap based on cosmetics. The MIC top has not been out long enough for anyone to judge its wear longevity. It's gone through design testing in Ford's climate chamber and wind tunnel just like every vehicle Ford develops does. It's gone through extreme field testing just like every other Ford vehicle does and all manufacturers perform on their vehicles. I'd bet Ford has far more test data on the MIC top than you do.

I was addressing convertible tops in general. Whether a hard top or fabric top, it is eventually going to wear out. The MIC top a removable, sectional plastic hard top; it is going to wear out. ALL convertible tops regardless of design and materials eventually wear out and break. I have two fabric-top cars in my fleet at the moment, one a 24 year old BMW that I've replaced the top once already about 8 years ago and it will be due another one in a few years. I had a '95 YJ that needed a new top after 8 years or so. And I'll bet 50% of soft top Bronco owners are going to have the top or rear plastic windows slashed open at some point. It's just the facts of life with a convertible.

Ask Ford, they recalled the tops for that “roughness to the edges.” So clearly it’s not part of the design.

 

[Michael Grasso]

Best choice I made was changing from the Mod Top to the soft and getting my Bronco now. By the time the Mod Top is ready all this will be a MIC issue and not a Mod.

 

[DesertMike680]

In light of this news, I'm hoping Ford wont decide to hold Broncos at dealers until a fix is issued, like the airbag recall.

 

[Snowdogyyz]

All true... sort of. My position from day 1 has been that it is the ugliest, most useless, unable to bear wait hardtop on any off road vehicle I've seen. I'll hold on to that $695, buy some Bitcoin with it, double my money, and put it towards a hardtop that I actually want when it becomes available. Might take one to two years but so will most reservation holders Broncos.

But the fact is it costs you today (or the day you take delivery) an extra $695 for the MIC. $3K later delivered is pure speculation, but yes shipping to you or your dealer will more than likely double the cost. My hunch however is that Ford will be doing damage control and subsidizing some of those costs for PR purposes. Not to mention if someone has a hardon for a crappy MIC 1.0 or 2.0 I'm sure Ebay or Craigslist will come to the rescue at very reasonable prices.

Well we certainly agree here! I ordered with the soft top for two reasons- “speedier delivery” and I don’t care for the mic top. Hopefully someone is already working on an aftermarket hard top not named Ford or webasto!!

 

[mC.242]

Damn, maybe I'll just keep my 1.0 top. Just need to solve that annoying popping noise.

 

[SpringTXOR]

I wanted both hard and soft top, waiting on bestop to fulfill the later!

 

[Snowdogyyz]

Where has one actually disintegrated? So the edges have some roughness to them; what does that actually mean? Do you actually know that the rough edges are going to be problematic long term? Do you know that rough edges are not within the design limits of the top once it is in full-rate production? Everyone here is assuming the top design is crap based on cosmetics. The MIC top has not been out long enough for anyone to judge its wear longevity. It's gone through design testing in Ford's climate chamber and wind tunnel just like every vehicle Ford develops does. It's gone through extreme field testing just like every other Ford vehicle does and all manufacturers perform on their vehicles. I'd bet Ford has far more test data on the MIC top than you do.

I was addressing convertible tops in general. Whether a hard top or fabric top, it is eventually going to wear out. The MIC top a removable, sectional plastic hard top; it is going to wear out. ALL convertible tops regardless of design and materials eventually wear out and break. I have two fabric-top cars in my fleet at the moment, one a 24 year old BMW that I've replaced the top once already about 8 years ago and it will be due another one in a few years. I had a '95 YJ that needed a new top after 8 years or so. And I'll bet 50% of soft top Bronco owners are going to have the top or rear plastic windows slashed open at some point. It's just the facts of life with a convertible.

Well I’ve had my gladiator for two years. I’ve removed and reinstalled the panels numerous times. Not a scratch, rough edge, delaminated area, crack, scratch, honeycomb, etc on it. It looks brand spanking new. Make all the excuses you want- the mic top is crap. And if this is what Ford sees as acceptable then they need customers to sign a waiver accepting that.

 

[xcxv]

Mine has vertical “cardboard” separation 1/8” wide, at least 12 inch long. I can see it when the door is opened. 2D MIC 2.0 with September QR sticker. Obviously rain is seeping in and making them wider and wider. Ford corporate can DM me for pictures.

 

[Theherofails]

Damn, maybe I'll just keep my 1.0 top. Just need to solve that annoying popping noise.

No popping with the 2.0 panels at least. My top is quiet. It's nice other than the delamination.

 

[Missy_Fussy]

Delete your Twitter App.... and start over new name new email... should bypass....

done that 4 times... it knows the computer you use - they even send me nasty grams via email that by creating a new account, I again violated their first ban

 

[Theherofails]

done that 4 times... it knows the computer you use - they even send me nasty grams via email that by creating a new account, I again violated their first ban

You sound about as popular with them as I am.

 

[Sooner]

OP, you need to start a poll, I think we are only talking about a small number of tops. Please put some numbers with it!

 

[erics667]

Until Ford comments, would using a finger nail top coat help seal the edges?

I was thinking of a heat source to melt and seal? Unknown if it melts or if it would look good after though.

Sponsored