What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[contented]

Many thanks to the forum member who mentioned putting dynamat/kilmat on the inside of skid plates. A well spent 1.5 hours today. I think it’s made a noticeable improvement in NVH (noise, vibration, and harshness) and complements material I’d previously put in rear storage area and doors. My finely tuned hearing aids like it.

Sponsored

 

[JAI STYLES]

Finally got around to adding a rear view mirror dash cam. Biggest pro is being able to pack my trunk to the ceiling and not lose visibility.

I opted for a cheaper Amazon one to test and see if I like it. It does everything I need for now, but in time I’ll certainly switch to wolf box, to gain the trail cam and higher quality images.

10/10 would recommend

 

[Thatguylegit69]

I figured. I never had this issue with my jeep but those were steel skid plates. I thought it might be because these are aluminum.

Missed you on Saturday!

Im glad you mentioned that, as i was looking at those brand plates youre running. Saw they offer a steel variant, so might swing that way.

Oh shoot, didnt realize you were gathering the Bronco Brigade for another run about. Will definitely have to make the next. Perhaps figure something out for Hurricane too!

Hope it was a blast!

 

[wjlapier]

M2M mid shelf. Easier access to the cooler now. The shelf is about 1/2 what the Hooke Road was ( which I still have and available for sale cheap ).

 

[White Zombie]

just seen this and has me wondering, Does my 22 2.3L also have this engine noise running through the stereo in my bronco? If so, guess I will be doing this FORscan mod.

Yesterday, using Forscan I disabled my fake engine "ESE" sound on my 2026 Bronco Badlands with the Lux package. Below are the after and before Forscan ASM data sets. I have already added my Steeda muffler so having both ESE and the enhance sound from the new muffler was a bit too much.

My initial setting for ACM 727-01-01 was "30FF FCFS 1060" and I modified it to "30FF FCFS 0060" but after I performed a write all the value changed to "30FF FCFS 0050". Not sure why the 6 change to a 5, but I performed it multiple times.

 

[Administrator]

Love seeing all the Bronco action, keep em coming

 

[Fastmc25]

40,000 mile oil change.

 

[CarbonGrayBronco]

Cleaned and touched up some chips on the bumper with truck bed liner. One of the end caps had a couple chips that were starting to rust so I wanted to sand it and seal it off as best as possible.

 

[Mean Green]

- spend 45 minutes finding the GD torx bit I dropped into the engine bay while buttoning up the air filter

Been there, done that… I cringed for you when I read it…

 

[JiuJitsuJoe]

Drove up to Santiago Peak…🛺

 

[Returntothefog]

Drove up to Santiago Peak…🛺

How’s this trail? I’ve been eyeing it and from what I heard it’s pretty mild

 

[JiuJitsuJoe]

How’s this trail? I’ve been eyeing it and from what I heard it’s pretty mild

Hey @Returntothefog,
It’s mainly a fire road. At the Main Divide section there is one off chute to play on and a few small features.
From Main Divide to Santiago Peak its a shelf road with some loose sections and couple turn outs.
It’s got a nice view up top to see OC area on one side and Corona area on the other side. Fun local drive to bring the family/friends or do solo. I recommend checking to see if the trail is open/closed if you go. They lock the entrance gate sometimes…

 

[KreeHBronco]

just seen this and has me wondering, Does my 22 2.3L also have this engine noise running through the stereo in my bronco? If so, guess I will be doing this FORscan mod.

It's my understanding that 2024+ all Broncos have it. Before 2024 only ones with the Lux package have it. One way to check, at least for me was if the exhaust sound changes going from ECO to Sport.

 

[White Zombie]

Thanks for the information

It's my understanding that 2024+ all Broncos have it. Before 2024 only ones with the Lux package have it. One way to check, at least for me was if the exhaust sound changes going from ECO to Sport.

 

[bfoster]

New shoes and a Fabtech level kit

Sponsored