What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[tock13]

Nothing "to" or "with" lately, but one "for". Finally assembled the E-Z 4X4 roof lift my wife got me for my birthday. Probably won't use it for a few months here in the Pacific Northwest, but it will be ready when the weather turns.

That thing looks tall! I like the forks on it instead of what my toplift has. I have the M2M attic shelf and this might be a better solution. It’s not great using the top lift with the shelf lowered. I am in the Pacific Northwest so the top isn’t coming off any time soon.

Sponsored

 

[ThunderFlash]

That thing looks tall! I like the forks on it instead of what my toplift has. I have the M2M attic shelf and this might be a better solution. It’s not great using the top lift with the shelf lowered. I am in the Pacific Northwest so the top isn’t coming off any time soon.

I too am in the PNW. Topless weather is only about 3 months, but damn it's an awesome 3 months, isn't it!

My garage is kind of low, but it has decent lift. The indoor Bronco is under it right now making it tough to measure accurately, but I'd say it's up about 7'-6" to the lifting plane. Of course the sides of the top will hang below that.

 

[Footer]

That thing looks tall! I like the forks on it instead of what my toplift has. I have the M2M attic shelf and this might be a better solution. It’s not great using the top lift with the shelf lowered. I am in the Pacific Northwest so the top isn’t coming off any time soon.

tock13,

I have the Toplift Pro as well and have been holding off on getting the M2M Attic Shelf (which I really want) because I'm not too sure if it will work with the shelf and M2M can't confirm they are compatible. What's your thoughts on how well it works with the Attic shelf installed ? Someone else on here has the shelf and uses the Toplift Pro also and says it doesn't fully get under the top and he has to kinda shimmy it on and off. What's your experience ?

Would be greatly interested in any feedback if you pull the trigger on the E-Z Lift, been thinking of switching over but not too sure it will work with the shelf either.

TIA

 

[Rumbloki]

Finally got all brether vents ran to under the hood. Tedious to say the least...

How many feet of line?

 

[KreeHBronco]

Did you change your shift linkage also? The shifter looks shorter or it could be my eyes.

 

[jakrbt]

Spent money on it....and it's only 3 days old!

Ordered RCI Sliders, Turn Off-Road Headliner, and GLCA Quick Release Hard Top bolts/handles/tiedowns.

 

[ThunderFlash]

Spent money on it....and it's only 3 days old!

Ordered RCI Sliders, Turn Off-Road Headliner, and GLCA Quick Release Hard Top bolts/handles/tiedowns.

The beginnings of a proper, loving Bronco relationship! You'll probably get a few offers to extend you're credit limit before you're done.

I have the RCI slider steps on both our 2-door and 4-door. I like them lots and lots.

 

[jakrbt]

The beginnings of a proper, loving Bronco relationship! You'll probably get a few offers to extend you're credit limit before you're done.

I have the RCI slider steps on both our 2-door and 4-door. I like them lots and lots.

It's actually my son's so it's really up to him what goes on it next. We'll see what direction, if any, he decides to take it.

 

[ThunderFlash]

It's actually my son's so it's really up to him what goes on it next. We'll see what direction, if any, he decides to take it.

The only thing better than spending money on your Bronco is spending your dad's money on your Bronco. Have fun with it!

 

[orion]

How many feet of line?

I bought a kit off Amazon. I'll link to it and the rest of the items I bought.

So the axles and the transmission have one size of rubber tubing coming off the nipples, and the transfer case was slightly smaller. I matched the tubing up at Napa. Bought 5 feet of the larger tubing and 2 feet of the smaller tubing. I then had to buy some barb fittings that matched the bigger tubing and some additional air hose fittings. The barb fittings that come with the kit works with the transfer case tubing. The kit only came with two straight air connect fittings so that's why I bought more.

So the lines go like this:

Factory breather nipple -> rubber tubing -> barb fitting -> quick connect air fitting-> airline tubing -> breather vent quick connect fitting.

Here are the items bought off Amazon:

Kit
BoCID Universal 4 Point DIFF... https://www.amazon.com/dp/B0CBPDQHZP?ref=ppx_pop_mob_ap_share

Barbed Fittings
6 Pcs 1/8" NPT Female x 5/16"... https://www.amazon.com/dp/B0F1TYPDRL?ref=ppx_pop_mob_ap_share

Quick Connect Air Fittings
6mm Push to Connect 1/8 Inch NPT... https://www.amazon.com/dp/B07ZHG8Y1Y?ref=ppx_pop_mob_ap_share

Let me know if you have any additional questions.

 

[cynicalrider]

Finally got all brether vents ran to under the hood. Tedious to say the least...

I thought the breathers were raised from the factory, is this not true?

@Noco, these things can be rectified!

What are the plus/minus buttons for?

 

[Reldn]

Put in an OEM cargo mat and the Mabett seat back covers.

 

[ThunderFlash]

What are the plus/minus buttons for?

The dash light brightness.

 

[jakrbt]

Pulled the OEM whip antenna off and installed a Ronin Factory 5" stubby

 

[Ellis Family Garage]

Picked up the Bronco this afternoon after the dealer had it for a week to do the shock recall, camera recall and fix the rear window defogger. Are all Ford dealers this slow. They always have an accuse.

Sponsored