Show us your installed wheel / tire upgrades here! (Pics)

[Jakethesnake]

Wheels: Brink Alpine titanium. 8.5”x 17”
Tires: Atturo X/T’s 35x12.5r17
Got 4 of the 5 installed.
Going to be my long road trip setup.
surprisingly louder than my M/T 37’s

While I don’t love the looks, I don’t hate it either.

You can instantly notice the weight and gearing change . This setup is under 90lbs while the other setup is over 107lbs.

Sponsored

 

[Go_UL_Cards]

 

[Asydbern]

How are you liking that EZ-4X4 roof rack ? Does it hold the roof section securely ? Any worries rolling on the highway at 80 mph ?
Do you have room at the rear to mount an awning ?

Thanks

I love the rack. I use it very often, however, I don't have the hinges for the front two panels, I just store them in the back of Bronco. The center section mounts to the rack using essentially the same setup as the factory mounts. Its very stable and secure, even at speeds up to 75+ MPH. I can't comment on how it would be with the front 2 panels hanging up there too though. With the windows open there is no noticeable difference between middle panel up there or not. However, if you close any of the windows at highway speed you get a slight whistle. I'm not familiar with awning mountings so I can't really say either way about that.

 

[Footer]

I love the rack. I use it very often, however, I don't have the hinges for the front two panels, I just store them in the back of Bronco. The center section mounts to the rack using essentially the same setup as the factory mounts. Its very stable and secure, even at speeds up to 75+ MPH. I can't comment on how it would be with the front 2 panels hanging up there too though. With the windows open there is no noticeable difference between middle panel up there or not. However, if you close any of the windows at highway speed you get a slight whistle. I'm not familiar with awning mountings so I can't really say either way about that.

Thanks.
I'm not interested in the flip back front panels, just looking to use the rack to hold the middle panel and want to make sure it is stable at highway speeds. Glad it is working out for you !

 

[Tugger5oh]

37x12.50r17 on Black Rhino Rapids 17x8.5 +0. Lift gets installed tomorrow but drove around today with minimal rubbing.

 

[fiatlux]

MT Canyon wheels in 17x9 0 offset wrapped
with the stock 285/70R17 BL rubber

 

[2 Tall Ones]

Less than a week old. Mickey T Baja Boss AT 33/12.5r18s on G-FX T26 18x9 0 offset installed on stock suspension 2023 OBX with 4WP High Clearance Crash Bats installed.

I am very pleased with the outcome.

UPDATE: After driving this configuration a bit I decided that the poke was a bit to aggressive, but I like the look and ride of the wheels and tires. So, to remedy it, I swapped out the OEM OBX flares for the painted SAS flares from Lethal Performance and am very please with the outcome.

 

[Santa]

35/12.5-17 mudd grapps and stock sas wheels

 

[2018 bigdog]

Hercules 35X12.5 18" on stock OB wheels with 1.5 inch bora spaces. Love the stance and look but hate the stock 7.5 inch rim size and hate spacers. I have these wheels waiting for me when i get my truck back from getting the new engine. Gonna swap tires over and keep it moving.

what are the details on the new ones ? look nice !

 

[BUCKYBRONCO2021]

what are the details on the new ones ? look nice !

Thank you! Here is the link:

https://a.co/d/c7FSoai

 

[2018 bigdog]

Thank you! Here is the link:

https://a.co/d/c7FSoai

Thanks! Do you happen to know the tire size in this photo ?

 

[BUCKYBRONCO2021]

Thanks! Do you happen to know the tire size in this photo ?

Those appear to be 35’s. Like what i have on mine.

 

[AMFMBRONCO]

Method 703 Ford Performance Wheels and Stock Grabbers 265/70/17

 

[JuanBronco]

RC 95 series 22x10 -25 offset with 35x12.50 AMP Terrain Attack AT. I personally enjoy the wider look, but honestly it has stabilized the Bronco and solved the rocking that I didn’t like. The ride is super smooth and the tires give a more aggressive look without any road noise. Some slight rubbing but it’s just stock suspension for now. Once we get back to the mainland it’s getting a lift and level.

 

[Onefaststang]

Here is our outerbanks with everglades wheels. Factory height, crash bars removed. It looks so much better.

Sponsored