SRQ Front Winch Bumper Group Buy

[Richterman]

I ordered mine 2 weeks before the group buy spun up and this last Mon. would be 12 weeks. I talked to Tyler @ SRQ today and they’re slightly behind, but my bumper is set to go to the build table next week and then to powder coating. I also ordered the aluminum skid.

I figure y’all should start hearing something in another month.

I’ll post up pics once I get it, as well as on the install. I’ll be installing a Smitty X2O Gen3 12k winch as well. Then I’ll see how much it sags and how much lift I need for 37’s!

I was hoping for a shorter timeframe.

Sponsored

 

[Chritaka]

I was hoping for a shorter timeframe.

Yeah, but only seems they’re ~2 weeks behind their posted lead time. Hoping it stays on track…

 

[Dmorty217]

Have to keep in mind these are hand built and have to be sent to powder coating which can be a few weeks sometimes. I waited longer than 12 weeks for my rear bumper to be built and installed. It was more than worth the wait

 

[medguy]

I spoke to SRQ yesterday and was told that we have 4-5 weeks left until the group buy bumpers get sent out.

 

[Richterman]

Yeah, but only seems they’re ~2 weeks behind their posted lead time. Hoping it stays on track…

looking forward to see it

 

[Dmorty217]

I spoke to SRQ yesterday and was told that we have 4-5 weeks left until the group buy bumpers get sent out.

I have seen the one Matt has on his wildtrak that the pictures are of, it looks great in person and wish I wouldn’t have bought my DV8 last summer. Have already given SRQ 3k, what’s another 2?

 

[Chritaka]

So the good news is I finally received my bumper. It looks awesome! Still waiting on the aluminum skid to ship.

Bad news is it appears I’m missing the ACC relocation bracket and likely a few other parts for the relocation of the camera and sensors. Also, no instructions were included, nor can be found on their site.

I reached out to @srqfabrications and hoping to hear back ASAP. It stinks as I took a day off to install it, but need to do the ACC relocate first and I’m stuck..

 

[Richterman]

Looks good. Can't wait for mine to show up.

 

[srqfabrications]

The guys are welding up all these bumpers right now. Already have a few finished up.

The only thing we are waiting on is the billet shackles which I CNC on our Haas in-house. I leave for my honeymoon tomorrow but as soon as I get back next Wednesday, I'll be finishing those up.

We are hoping to have raw steel bumpers shipped out before July 4th and powder-coated ones shipped out following the holiday.

 

[Chritaka]

So the good news is I finally received my bumper. It looks awesome! Still waiting on the aluminum skid to ship.

Bad news is it appears I’m missing the ACC relocation bracket and likely a few other parts for the relocation of the camera and sensors. Also, no instructions were included, nor can be found on their site.

I reached out to @srqfabrications and hoping to hear back ASAP. It stinks as I took a day off to install it, but need to do the ACC relocate first and I’m stuck..

Update: I talked with Tyler and they're sending out the missing ACC bracket and sensor grommets next day air. Also, seems they have an updated pair of frame braces that they're powder coating and sending out as well by the end of the week. He said I could install the bumper and swap them when they come in, I don't need to remove the bumper to swap. Though, I'll likely wait to install when they come in. They were really responsive yesterday, which I greatly appreciate....

Looking forward to all of you getting yours and seeing them on your rigs!

 

[Richterman]

The guys are welding up all these bumpers right now. Already have a few finished up.

The only thing we are waiting on is the billet shackles which I CNC on our Haas in-house. I leave for my honeymoon tomorrow but as soon as I get back next Wednesday, I'll be finishing those up.

We are hoping to have raw steel bumpers shipped out before July 4th and powder-coated ones shipped out following the holiday.

Thanks for the update

 

[Chritaka]

Update: I talked with Tyler and they're sending out the missing ACC bracket and sensor grommets next day air. Also, seems they have an updated pair of frame braces that they're powder coating and sending out as well by the end of the week. He said I could install the bumper and swap them when they come in, I don't need to remove the bumper to swap. Though, I'll likely wait to install when they come in. They were really responsive yesterday, which I greatly appreciate....

Looking forward to all of you getting yours and seeing them on your rigs!

Already received the ACC bracket and grommets! Excellent customer service!

 

[Marcorvette]

I ordered mine on feb 21st and barely got it on june 19th. It was like a 20 week process.

 

[Marcorvette]

fitment is not great. On both ends I have the bumper right against my grill and rubbing on it. Also. If you move the ACC. I’m having an issue with it reading and actually working. It seems that it’s catching the bull bar.
If you have a front camera with a sprayer. You’ll have to delete it and cap it. Since there is no place to put the sprayer.
So.. now the fun part of modifying to make it work perfectly.

not also seems like anytime you might have to take off the grill. The bumper will also have to come off.

 

[Chritaka]

fitment is not great. On both ends I have the bumper right against my grill and rubbing on it. Also. If you move the ACC. I’m having an issue with it reading and actually working. It seems that it’s catching the bull bar.
If you have a front camera with a sprayer. You’ll have to delete it and cap it. Since there is no place to put the sprayer.
So.. now the fun part of modifying to make it work perfectly.

not also seems like anytime you might have to take off the grill. The bumper will also have to come off.

Man, I asked a lot of questions about that fitment so close to the grill before I ordered mine. I wonder if it has something to do with the updated frame brackets they're sending me, which should be here tomorrow? Have you talked to @srqfabrications about it? They were really responsive when I was missing parts and I received those yesterday...

I probably won't be able to install mine until Sunday and will probably take most the day with wiring the winch and now having to do a few mods. I think I was going to notch out the top-middle of the plate so I don't have to relocate the winch control box as it needs probably 1/2-3/4 inch to clear. I might trim some of that edge as well while I'm at it...

Hey, it does look great though!

Sponsored