AR | SLAP / BPM - This is the bulletproof mount

[Shawn_1121]

The BALLS SLAP combination

how can i mount a go pro using the center slot? anyone have any ideas on what size that whole is?

going on a cruise and would love to be able to capture it on vid. any help is appreciated. thank you in advance

Sponsored

 

[AceGoliath]

how can i mount a go pro using the center slot? anyone have any ideas on what size that whole is?

going on a cruise and would love to be able to capture it on vid. any help is appreciated. thank you in advance

Threads are 1/4-20 for the attachment points.

Can rig up something simple utilizing stuff like this:

https://www.amazon.com/Fotasy-Threaded-Screw-Adapters-Pieces/dp/B00KQXJ66A/ref=sr_1_1?crid=4ORSQIPXSPKU&keywords=1/4-20+threaded+go+pro&qid=1665147270&sprefix=1/4-20+threaded+go+pro,aps,88&sr=8-1

https://www.amazon.com/Tripod-Adapter-Camera-Mounting-Accessory/dp/B07ZSGBVKH/ref=sr_1_3?crid=4ORSQIPXSPKU&keywords=1/4-20+threaded+go+pro&qid=1665147375&sprefix=1/4-20+threaded+go+pro,aps,88&sr=8-3

 

[Shawn_1121]

Simple GoPro attachment

 

[rhinojlu]

Picked up the Bronco at 4pm… mount was installed by 5pm

Hey man do you have links to those arms and that arm extension by any chance? I'm guessing you're using the 20mm balls

 

[Shawn_1121]

Hey man do you have links to those arms and that arm extension by any chance? I'm guessing you're using the 20mm balls

67 designs

 

[rhinojlu]

67 designs

Cool that’s what I figured thanks

 

[Toomuchgear]

This helped a lot, thanks!

I was trying a credit card but didn't really do the trick. I didn't have any plastic pry bars either. I installed an BALLS in the center hole and just used that to pulled straight up and the OEM piece came right out.

I received and mounted mine.

After removing the two OEM screws, the instructions tell you to use a plastic pry tool to disengage the clips on the OEM mounting apparatus. The clips are at the two corners of the OEM apparatus closest to you. I did not have a plastic pry tool, so I inserted my AR BYODR screw into the center hole on the OEM apparatus and then placed a flat-edge screwdriver under that screw and gently pulled the entire thing upwards to expose the clips. Then I just wormed my finger under the plastic and pulled up the rest of the way to completely remove the OEM apparatus.

Hope this helps for those receiving their mounts!

 

[Deltamav]

This helped a lot, thanks!

I was trying a credit card but didn't really do the trick. I didn't have any plastic pry bars either. I installed an BALLS in the center hole and just used that to pulled straight up and the OEM piece came right out.

Nice, same basic concept that I was describing!

 

[Dickzip]

@EIGHTLUG dam it I just ordered this and now I found the code for members, can u send me balls or something?
5445 order number
and where are the Everglades Badges? Lol

 

[EIGHTLUG]

@EIGHTLUG dam it I just ordered this and now I found the code for members, can u send me balls or something?
5445 order number
and where are the Everglades Badges? Lol

We can add an extra patch in your order and we’re getting closer on the EVERGLADES fender badge.

 

[JonDW29]

Finally grabbed one of these. I don't have the need for the full accessory rail, but feel like this gives me some options for mounting past the flimsy factory option.

 

[DallasCajun]

Ordered…no more worrying about the flimsy ‘Accessory Ready’ piece.

 

[Chritaka]

Ordered!

 

[Crowza]

Ordered!

 

[JonDW29]

The tackform phone holder I was using doesn't have a long enough mounting screw to mount on the BPM. Anyone know the right thread type, etc. offhand? Need to track down some longer bolts.

Sponsored