What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[CUPRA]

I checked out some new tube doors and recorded another installation video. Love how they turned out, and got a decent photo too! Will release the video soon!

Sponsored

 

[Squirreldog]

I think the slideout table is my next big purchase once I recoup some cash from ordering wheels and tires yesterday. I'd be curious to see more about how that mountain bike fits inside with the seats folded down.

Here’s a few pics I took after my ride. Bike fits inside with the tailgate closed and the front passenger seat moved up about halfway. Fork is secured with a thru-axel mount.

This is a medium Santa Cruz Tallboy, which has a long wheelbase for a short-travel bike. It has a dropper post and at the lowest position the saddle is just under the rollbar. If you don’t have a dropper post, removing the saddle would be necessary but is quick.

 

[HorizonHunter]

Got my graphics from @Underground Graphics installed. Will take better pictures later, but love how it turned out.

 

[Smheard]

Put in the tailgate table and built a bike fork holder. This thing is so fun

Slide out tailgate installed Tuesday myself.

 

[Browp24]

I installed the IAG interior lights and some LevelUp tie Rod sleeves.

How easy was the install and do they provide a lot more light? I am on the fence about getting them

 

[Browp24]

Got my graphics from @Underground Graphics installed. Will take better pictures later, but love how it turned out.

Installed these blue aluminum covers over all 3 latches today. And placed the cheap oem big bend decals on tailgate and engine cover.

I really like those latch covers. I have them saved on my Amazon list. I was going to go black but the blue looks great. Do they match the blue stitching (if you have it)

 

[ssypien]

Added the WeBoost!

 

[Broncojbl]

Hit some seriously big dunes today.

Impressed with the bronco, kept up with some bigger more powerful cars.

Unfortunately she took some hits and the skidplate has got quite a beating..

Thanks for the ride!

 

[Deleted User 5719102]

I really like those latch covers. I have them saved on my Amazon list. I was going to go black but the blue looks great. Do they match the blue stitching (if you have it)

I don't have the blue stitching. I went with blue as its the accent color I've been going with to contrast the body color of cactus gray.

 

[Oski96]

I checked out some new tube doors and recorded another installation video. Love how they turned out, and got a decent photo too! Will release the video soon!

Very nice! What brand are the lower door panel sill covers?

 

[CUPRA]

Very nice! What brand are the lower door panel sill covers?

 

[Tork]

How easy was the install and do they provide a lot more light? I am on the fence about getting them

If you watch the IAG video prior to the install, then do each step and go back and watch the video on anything you are unsure of, it is easy. Like everyone says, tapping into the gray and purple wire is the worst part. I used a small flat tip screw driver to separate the wires next to the connector to ease the installation of the scotch lock type connector. The extra light is well worth the effort. I will wire in to the upfitter switch, so I can turn on the new lights when the doors are closed. Pretty easy, if you follow the ford instructions. Good luck, you’ll be happy you took the effort.

 

[broadicustomworks]

Homemade attic tray, additional small flat bar underneath for clipping radios, can be used with gear straps to hang straps, cords, air hose if needed.
Lined it with kayak deck mat to prevent slippage, waterproofing, rattles.
Used the Pura Vida traction board uprights.
It’s a shame it negates the top from being able to go fully down, but best I can measure it seems to do so would limit you to about a 8.5-9” wide tray.
I tried to remedy some of that headache with some RivNuts and quick-turn knobs to remove the shelf. No such magic for the uprights, as there is no room for them between the mounting holes and the vertical part of the brackets.
So it would take maybe 3 minutes with an Allen wrench to remove those as well.

 

[sirvegetable]

This past weekend, I installed the Mabett Rear Courtesy Reading Light. Makes a huge difference back there! 12 LEDs there now instead of the original 2 from the factory! 4 facing the front, 4 facing down and 4 facing in the cargo area.

Link to this product?

 

[CUPRA]

Link to this product?

The link is in the description of the video, I put links in all of my video descriptions to the products.

They are currently out of stock but them plan to have them back in stock in 1-2 weeks.

Sponsored