9/19/22 Build Week

[au4stree]

Actually, you should already have the window sticker available to you on the Ford Tracker or ordertrack.app. I would suggest using the latter as it li

Actually, you should already have the window sticker available to you on the Ford Tracker or ordertrack.app. I would suggest using the latter as it links out to all relevant information. You'll need the order code from your purchase agreement and your VIN number.

Thanks for the help! I think I got all the info added, did the best I could from my phone. Our computers and such are packed up, moving absolutely sucks! Let me know if something doesn't look right.

Sponsored

 

[Spleenclot]

Thank you! Judging by the info you provided for place in line and rotation number, I think you're a 9/22 blend and not 9/20. I made that edit, but let me know if you think I'm off.

Thank you! You're our pilot!

I think you're right about the 9/22 blend date. I just read it wrong.

 

[CTownPride]

Just took a peek at the tracker, no update as of yet that ours has been “built”.

Yes, that probably won't happen until later in the week. In the meantime, you can see your vehicle "come alive" at the following link:

https://www.motorcraftservice.com/AsBuilt

You'll need to enter your VIN, prove that you aren't a robot, and then you'll see a page that looks like this:

There won't be much on the page right now, but you will see an alphanumeric sequence of codes appear below the "BCE Modules" heading once the modules have populated. This is a sign that your build is moving along and the computer in the vehicle has been turned on. You may also get a tear tag to populate right below your VIN number - a sign that your build is essentially done, though there are other things that can hold up moving into "Built" status. You may also move to "Built" status before seeing the tear tag.

You, along with the four other known blend dates of 9/19, should see the mods pop at some point tomorrow - Wednesday at the latest. It appears those with 9/16 blends on Friday last week started to see their mods pop today, so I'm hoping we'll see some of you pop by tomorrow evening.

 

[alexraw]

What exactly is a tear tag? Sorry, some of this information can be a bit confusing to me at times.

 

[CTownPride]

What exactly is a tear tag? Sorry, some of this information can be a bit confusing to me at times.

Honestly, I've been paying pretty close attention to these forums most of the year and I'm still not entirely sure. I know it's a sign your build is done - or nearly done. I think I saw some people say that it sets the factory default settings in your system in case the dealer would ever need to reset them. A quick Google search returned this...

The Tear Tag allows Ford the ability to identify any change made to a vehicle concerning its emission equipment, calibration or any deviation from the standard emissions configuration. It also allows any updates to be controlled and documented.

For the purposes of your Bronco being built, I just know it's a sign that you're close to being done.

 

[WonkyBronky]

Mine should have been built yesterday. Shows invoiced 9/12, blend 9/19.

Not sure what the "modules" are or why they matter. Showing "G" under BCM.

Expecting this to be parked next to my Raptor soon:

 

[CTownPride]

Mine should have been built yesterday. Shows invoiced 9/12, blend 9/19.

Not sure what the "modules" are or why they matter. Showing "G" under BCM.

Given you were 491/668 in line, you likely didn't start down the final assembly line until second shift. Your Bronco will likely finish up some time today, though you won't go into "Built" status until everything is finalized.

For most people, the modules are the next thing you see as evidence of your vehicle being built after getting your window sticker. It will look something like this when populated:

I can't tell you what each and every code means. I just know that when it looks like this picture, it's a sign your vehicle has been turned on and is nearing completion. Most people see this before receiving a "Built" email and moving into "Built" status. If you want to track your build closely, I'd suggest checking the modules page.

 

[Sewell]

I have modules!

 

[DawgRaptor]

I have modules!

Awesome! Congrats!

 

[CTownPride]

I have modules!

Here we go!

So @bajabronco57 is next, but they were 269 vehicles behind, so it might be a little while. Hopefully they or one of @StephT4, @wonkybronco, and @Tuna Colada see theirs this evening at some point.

 

[bajabronco57]

Here we go!

So @bajabronco57 is next, but they were 269 vehicles behind, so it might be a little while. Hopefully they or one of @StephT4, @wonkybronco, and @Tuna Colada see theirs this evening at some point.

No modules yet I'll post as soon as they are up. Keep in mind I'm a Raptor so random bullshit could occur.

 

[outnumbered]

No modules yet I'll post as soon as they are up. Keep in mind I'm a Raptor so random bullshit could occur.

With Ford? Never!!

 

[bajabronco57]

No modules. Given the time probably wont see them today.

 

[CTownPride]

No modules. Given the time probably wont see them today.

There are two shifts working at the plant. They could populate tonight, though I don’t know the exact manner in which they appear on the site. Obviously understand if you don’t want to keep checking all evening, but might be worth a peak before bed. Hope they’re there tomorrow morning!

 

[Bronc281]

No modules yet today. Probably see them tomorrow since I was 881/1090.

Sponsored