I ordered two back on 7/26 and still haven’t got the. Or received a tracking number. Is that correct? Normal?
Send it! I want one now! Thank you.AR | SLAP / BPM Structurally Located Accessory Point / Bulletproof Mount
Bronco6G.com forum Members, use the code B6GSLAPME20 for 20% off your purchase!!!
We took the OEM plastic 'ACCESSORY READY' panel with its single (flimsy) 1/4-20 threaded location and deconstructed it. What you have now is a plastic dash trim piece with a threaded metal sleeve and nut inserted. The threaded feature has been known to come apart. From what we've seen from feedback from our customers, one to three mm of tolerance is common, when mounting their BAM.
It's stealthy, low profile, and probably the way the OEM 'ACCESSORY READY' mount point should have been designed from the get-go.
What we did was turn the plastic part and design a 6061 billet piece that uses M6 threaded hardware to mount to the steel dash structure, making a very rigid and 'bomb proof' mounting location. We took it a couple steps further by adding two more 1/4-20 threaded locations that flank the original center location, making the single piece so much more versatile. Add in our proprietary keyway to accept our B.A.L.L.S. and you have a formula of:
1/4-20 316 stainless bolt + 6061 billet ball (20mm or 1") + 6061 billet bracket + M6 316 stainless bolt -into the steel dash structure.The AR | SLAP / BPM accepts out AR | BAM & TAP and is brand agnostic to other manufacturers. It will allow their rail/mount something substantial to mount to. I'm 3D printing the prototype tomorrow. The final product will be cerakoted to match the surrounding dash plastics and give the AR | SLAP / BPM an OEM look. The ARCHETYPE RACING script will be machined into the part and have a similar appearance to the OEM 'ACCESSORY READY' script which is very subdued.
It literally doesn't get any beefier than this.
Call’em they’ll hook you up. Only don’t mention that I told you because they are probably tired of LSU Jonno changing colors of orders
I sent @EIGHTLUG a PM here. Don’t see a number on their site. But I’m old and no good at searching anymoreCall’em they’ll hook you up. Only don’t mention that I told you because they are probably tired of LSU Jonno changing colors of orders
If your order was for black, those just became available. We switched from anodized black to cerakote. Yours would be the new cerakote finish. We held back on shipping the previous black because we could not be guaranteed that they were Type II hard anodized which is not susceptible to UV discoloration.
How do we order the blue ones? Those aren’t an option on the website.
Exactly! That’s why I’m still waiting on a response to my PM and email!
From what I've gathered, you can just add "Make my B.A.L.L.S. blue" in your order notes and you will get blue B.A.L.L.S. magically shipped to you.Exactly! That’s why I’m still waiting on a response to my PM and email!
Well damn. I ordered yesterday and emailed the site and PM’d you. I didn’t get a response. Can you check and find out? My Wildtrak is Velocity Blue and I think the blue would work so much better than black.
how soon
