2-door desert runner Bronco w/ custom tire carrier

[Aztec1382]

Just universal ones from rally armor

Sponsored

 

[Aztec1382]

Just need to wire them up

 

[Aztec1382]

Goat fab
Steps

 

[CentralFLBronco]

Added some mud flaps
Window tint
Expel on the lower doors
Jks tire clearance kit
Kicker key 200.4 and 500.1
Purchased a front bumper from svc
Waiting on powdercoat

Which model kicker speaker did you go with in the rear?

 

[Aztec1382]

KICKER 46CSC44 4 INCH SPEAKERS × 2

 

[Aztec1382]

Goat fab steps with a tread plate

 

[Aztec1382]

Was driving around without a bumper
Hoping a nice swing out tire carrier would be released soon.
And ran out of patience
Going with the dv8 as a temporary solution

 

[Aztec1382]

Raptor lined tread plates

 

[Aztec1382]

Used some of the ford customer satisfaction points and purchased the door key pad

 

[Aztec1382]

Purchased a set of
icon rebound pros (black)with 0 offset
Ran a hub centric ring
The offset brought the wheel out about 1.25 inches compared to the sas wheel

paired it with some
37” kenda klevar rt tires

Sent the wheels for powder
Picked them up yesterday and was able to get them mounted

You can definitely feel the weight difference from a 35 to a 37
Was averaging 18 mpgs on the 35s

 

[Hedrock]

Purchased a set of
icon rebound pros (black)with 0 offset
Ran a hub centric ring
The offset brought the wheel out about 1.25 inches compared to the sas wheel

paired it with some
37” kenda klevar rt tires

Sent the wheels for powder
Picked them up yesterday and was able to get them mounted

You can definitely feel the weight difference from a 35 to a 37
Was averaging 18 mpgs on the 35s

i Guess no crash bars anymore? Get it to rub yet at full lock or stuff?

 

[Aztec1382]

crash bars removed, went with the jks kit
no rubbing at full lock, going out this weekend to test while wheeling

 

[Aztec1382]

Replaced the plastic diff cover
For the oem steel
Just need to trim a small section to make it work

 

[Aztec1382]

Installed the oracle tail lights
Some washers are needed to line up the body lines

 

[Aztec1382]

Finished the king and camburg uca install
Had to figure out a way to mount the front reservoirs since i cut off the crash bars.
Purchased some weld on mounts from poly performance.

Sponsored