Show us your installed wheel / tire upgrades here! (Pics)

[LarryBirdsFace]

Thanks brother. These are the look I’m shooting for on my EG 2-door Black Diamond. The -6 offset pushes past the flare but not a huge amount?

to be honest it’s more than I really want but it’s nigh impossible to find a Baja style wheel that is in thr +10 to +20 range that would keep the tires inside the flare. It’s probably two and quarter or so past the flare at it’s widest point. Sasquatch flares would probably come reeeeeeaaaalllllll close to covering and I may go that route at some point

Sponsored

 

[Ford2201]

to be honest it’s more than I really want but it’s nigh impossible to find a Baja style wheel that is in thr +10 to +20 range that would keep the tires inside the flare. It’s probably two and quarter or so past the flare at it’s widest point. Sasquatch flares would probably come reeeeeeaaaalllllll close to covering and I may go that route at some point

That’s what I figured. A little poke doesn’t matter to me. But if it’s too far out I’d have to consider Sasquatch flares too. Although I’m not a huge fan of big flares. I found some 0 offset rims I may go with and hope the poke looks right. Thanks for the inspiration

 

[Love Shop Auto Lo]

Trim: Badlands Sas

Wheels: Volk TE37XT M-Spec
Size: 17x8.5
Offset: -10

Tire: GoodYear Territory MT
Size: 315/70/17
(I know it's the stock size tire, but putting here for future reference)

Lift Kit: Factory SAS

Pokes just a lil past the sas fenders.

 

[pequigah]

Cyber Orange Sas Badlands
35/11.5/17 Trail Grapplers
Painted beauty rings grey
Painted OBX flares

@Big AZ I'm curious why you went with the 11.50s over the standard 12.50s. I'm planning to swap my stock SAS tires for mud terrains, so I'm interested to know the benefits that the 11.50s may offer over the 12.50.

Also, how'd they look before you switched to the smaller OBX fenders? Did they look too far tucked w/ the SAS fenders?

Thanks in advance and sweet looking ride!

 

[Jsullivan]

After 16 months my ride is complete.
For those of you still waiting it was worth it.

 

[Bronc69]

Trim: Badlands Sas

Wheels: Volk TE37XT M-Spec
Size: 17x8.5
Offset: -10

Tire: GoodYear Territory MT
Size: 315/70/17
(I know it's the stock size tire, but putting here for future reference)

Lift Kit: Factory SAS

Pokes just a lil past the sas fenders.

Simple, clean and retro! Love them.
Bye any chance were you able to weigh them for a comparison to the stock wheels?

 

[Love Shop Auto Lo]

Simple, clean and retro! Love them.
Bye any chance were you able to weigh them for a comparison to the stock wheels?

Thanks for the kind words! You summed up the build really well.

I did notice that these were significantly lighter than the Rotiform wheels I had previously had on. Not sure if this translates into better MPG, but I've noticed that my truck picked up about 1 to 1.5mpg more. However I could be talking out my ass, who knows

TE37's: 17lbs
Bronco SAS wheels: 35.5

 

[GeneralBoisvert]

Cyber Orange Sas Badlands
35/11.5/17 Trail Grapplers
Painted beauty rings grey
Painted OBX flares

you might have been asked already but do you have any pics of the poke with the standard flares? This is the route I’m going as well and it might ease my decision.
Thanks.

 

[Jhuff]

So I installed my Fabtech 1.5“, and some new shoes today. May add .75" to the back for some rake. After being very vocal against MIC colored tops, I am torn about adding greyish wheels, but they are the only ones I like.

Wheels:
Fuel Vector 17“ (Anthracite color)
Offset +07mm
Weight 31Lbs

Tires:
Kenda Klever 35x10.5x17
Weight 67Lbs

I wanted light forged wheels, but am happy for now. This combo is only a few pounds heavier than Sasquatch. Surprisingly, these 10.5 tires are as heavy (and have almost as wide tread-width) as most 12.5s.

 

[TXArea51]

So I installed my Fabtech 1.5“, and some new shoes today. May add .75" to the back for some rake. After being very vocal against MIC colored tops, I am torn about adding greyish wheels, but they are the only ones I like.

Wheels:
Fuel Vector 17“ (Anthracite color)
Offset +07mm
Weight 31Lbs

Tires:
Kenda Klever 35x10.5x17
Weight 67Lbs

I wanted light forged wheels, but am happy for now. This combo is only a few pounds heavier than Sasquatch. Surprisingly, these 10.5 tires are as heavy (and have almost as wide tread-width) as most 12.5s.

How hard was the install

 

[Aurongel]

After 16 months my ride is complete.
For those of you still waiting it was worth it.

Thought those were the stock OBX wheels at first glance. I like how you repurposed your stock Bronco logo wheel caps on non-stock wheels. Very unique and tasteful, like it’s the type of thing Ford should offer in the B&P tool.

 

[SubmarineNuke]

I put Nitto Recon Grapplers on today, 35”x12.50x17. Kept the Sasquatch wheels, just traded out the tires. (Now to sell the old ones).

 

[Erick2123]

22 Badlands Sas

Updated the stock set up finally to

17x9 method mr312 -12mm offset

tires
35 bf ko2s

gotta ride feels better and rides quieter I love
the way it came out and stance I was looking for.

 

[StephenSJ]

After 16 months my ride is complete.
For those of you still waiting it was worth it.

Looks great! What wheels are those and what tire size did you go with? Also, which step rails are those? Thanks.

 

[Victoryengineer]

22 Badlands Sas

Updated the stock set up finally to

17x9 method mr312 -12mm offset

tires
35 bf ko2s

gotta ride feels better and rides quieter I love
the way it came out and stance I was looking for.

Those look great on your rig.....well done! It's hard to go wrong with Methods

Sponsored