What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[MnLakeBum]

I installed some lights last night, and I have to finish cleaning up the wiring this morning as my teenage daughter took the Bronco out before I could finish. I've only got about 25 minutes into it, so it's a simple install especially with the factory accessory switches. My dealer was amazing for buying the Bronco but they quoted me $699 for these pods installed and I paid $324 from the Ford website.

The bolts that came with it were silver and had a small head requiring a washer, so I used some leftover TV bracket black bolts that didn't require a washer to secure them. I've ordered a short antenna and an antenna plug as I don't listen to AM or FM more than a few times a year.

Sponsored

 

[FATHORSE]

Her you go @Tor148 Amazon.com: BESTAOO Door Sill Guards Kit, Door Entry Guards for Ford Bronco 4-Door Accessories Door Sill Protector Replacement, 4pcs/Set (Black) : Automotive

Guess they not have any for the 2 door? Wonder if the front would still fit?

 

[A10Warthog]

Added USB ports to the dash!

Bought the defrost vent and center speaker grille

USB port from Amazon

Since I wont have a speaker below this panel, I cut a piece of rubber and hot glued it in. I didnt want to risk potential moisture/rain dripping in. Also put some glue around the threaded ring to keep it from backing off over time.

It was dark when I button up the install so, pics are crappy


Drawing power from the power source I installed inside the floor console for my MagSafe phone charger.

Looks great, I plan on doing exact same. By any chance you still have part number for the defrost vent or link to it?

 

[SnowBronco]

Went out gold panning with the boy and the bronco for the first time!

 

[Tor148]

Finished install off shock skid plates.

Foutz Motor sports.

I researched all I could find and these seem to be the thickest and strongest. The construction is first rate. Install wasn't bad. Jacked up by the frame, let the tire hang a little bit and no problem.... I know some people don't like to remove the shock bolt but in my opinion that is the strongest way to mount to actually prtect your vehicle

They are 3/16 and almost doubled at the main bolt hole.
Would definitely recomend.

 

[604Bronco]

Went out gold panning with the boy and the bronco for the first time!

You’re rich now!!!

Where abouts was this? Looks like fun!

 

[FZ4]

Bronco script - bronco depot
Hood struts - Red Line Tuning
Red Shackles (my friends don’t like) might paint them Area 51 - Gear America Uber
Door sills - Fast Intentions
Husky Liners Xact Contour
AR TAP rail - Archetype Racing
AutoStop Eliminator

Love this thing!!

I like the red shacks!!

 

[dokk]

Window Tint!

 

[diamonddude97]

Took my Bronco Bucky home for the first time and then straight to the beach

 

[BAUS67]

Finished install off shock skid plates.

Foutz Motor sports.

I researched all I could find and these seem to be the thickest and strongest. The construction is first rate. Install wasn't bad. Jacked up by the frame, let the tire hang a little bit and no problem.... I know some people don't like to remove the shock bolt but in my opinion that is the strongest way to mount to actually prtect your vehicle

They are 3/16 and almost doubled at the main bolt hole.
Would definitely recomend.

They have a nice oil/trans pan/transfer case skid plate for the Bronc also.

https://www.foutzmotorsports.com/co...essories/products/2021-ford-bronco-skid-plate

 

[Richterman]

Installed rock slide engineering power steps. Heavy. It's a job for 1 man. But got it.

 

[RiskyB]

Brought her home! :-D

 

[MnLakeBum]

Full clay bar and applied ceramic/graphene coating today.

 

[Ground_zero298]

Whole day spent doing graphene ceramic. Outside, everything but the tires. Inside 100% including seat belts. Love this stuff. Nice even finish on all the plastics.

 

[SevenT]

I think I got this backwards. The dirt is supposed to be on the outside.

Sponsored