What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[cardad]

We tested out BAJA mode in our Badlands and it was fun! By accident we found the perfect trail to do it on near Moab. Not a single person around and a ton of straightaways with not too much of rock.

With the 2.3 L the power was plenty for my taste given the 5 gear limit in BAJA. Even in 4H I did about 2X the mpg (in a 2.7) from driving in 4L all day at Moab Off-roadeo.

Sponsored

 

[Raskew]

We tested out BAJA mode in our Badlands and it was fun! By accident we found the perfect trail to do it on near Moab. Not a single person around and a ton of straightaways with not too much of rock.

With the 2.3 L the power was plenty for my taste given the 5 gear limit in BAJA. Even in 4H I did about 2X the mpg (in a 2.7) from driving in 4L all day at Moab Off-roadeo.

How did you get your front camera to work at speed?

 

[BroncoKong Jr.]

How did you get your front camera to work at speed?

It works in Baja mode

 

[heelyeah]

are your script decals Bronco Depot? and did you have to trim them at all to fit them in that spot? thats where i've been wanting to put mine and keep the OEM badging but haven't seen anyone try it yet!

I got mine from Bronco Depot and did mine the same way. No trimming required. See below.

But ultimately I didn’t like that configuration and moved the factory badge down as seen in the next picture. I’ve been much happier with it this way.

 

[p3pete]

are your script decals Bronco Depot? and did you have to trim them at all to fit them in that spot? thats where i've been wanting to put mine and keep the OEM badging but haven't seen anyone try it yet!

Got them from http://www.theocdplug.com/ Pretty reasonably priced. No trimming. If I had to do it again, probably would have gone gloss instead of matte black

 

[cardad]

How did you get your front camera to work at speed?

BAJA and Rock Crawl modes will automatically keep the camera on. It also enables the wheel cameras which you can select from the upper left camera view options.

 

[AZSky]

Washed it softly, thoroughly and repeatedly after delivery on an open trailer. I played the roulette with an open trailer and did not win. Paint OK, glass with pockmarks and one small chip which needed filling. Nice gesture from the

Blue Chip guy, he did it free for a new car.

 

[Richtor]

I got mine from Bronco Depot and did mine the same way. No trimming required. See below.

But ultimately I didn’t like that configuration and moved the factory badge down as seen in the next picture. I’ve been much happier with it this way.

Link to Bronco Depot?

 

[604Bronco]

Washed it softly, thoroughly and repeatedly after delivery on an open trailer. I played the roulette with an open trailer and did not win. Paint OK, glass with pockmarks and one small chip which needed filling. Nice gesture from the

Blue Chip guy, he did it free for a new car.

Man, it took me a second to comprehend what colour your Bronco actually is under all that That's dirtier than many Bronco's will get, and yours just sat on a trailer!

Glad it was (fairly) unhurt though!

 

[NKovo11]

I got mine from Bronco Depot and did mine the same way. No trimming required. See below.

But ultimately I didn’t like that configuration and moved the factory badge down as seen in the next picture. I’ve been much happier with it this way.

was removing and then reattaching the factory badge fairly simple? Confident they will stick? Any additional adhesive needed?

 

[heelyeah]

Link to Bronco Depot?

Unfortunately it seems that Ford shut them down a couple months ago. Probably a cease & desist letter for violating Ford's IP rights. There are imitators who have made similar product mentioned in the thread already. I believe OCDPlugs is one.

was removing and then reattaching the factory badge fairly simple? Confident they will stick? Any additional adhesive needed?

I didn't need any additional adhesive. Just used a hairdryer on the warm setting and took my time. Came right off and stuck right back on with no problems.

 

[2ata]

Dropped it off for full PPF install.

 

[Richtor]

Dropped it off for full PPF install.

I just dropped mine off for Suntek Ultra 8mm PPF on the both sides.

 

[2ata]

I also went with the SunTek ultra.

 

[Richtor]

I also went with the SunTek ultra.

We’re going need pics when done to compare. Haha

Sponsored