What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Roger123]

Got my rear seat delete platform nearly complete. Just need to figure out what to do for carpet and cut a slot for the stowage area strap.

I used some angle brackets to bolt it down using the seat bottom bolts. I didn't want it moving around and that seemed the best way to bolt it down, it's solid as a rock. I "dimpled" the plywood where the seat studs are just so the plywood sat down better.

Pino hinge added so I can access the jack stowing area and I can fold the gab over 180 so I can still use the factory tie-down points.

$50 sheet of plywood and a piano hinge.

Granger seems to approve.

Sponsored

 

[broadicustomworks]

I almost tried that Spraymax matte clear in a can myself.
I couldn’t decide whether to do the center matte again or not. Figured worst case if I didn’t like the gloss I could tape off the red and matte it.
Ive always used actual matte clear through a gun, never tried the can stuff.
but it did catch my eye.

 

[Dez]

Played with some stickers to break up all the gray in the interior.

 

[zane8stacks]

4 of my new method 703s came in so i got them installed today wrapped in ridge grapplers. i think they look good, but i kinda wish i would have waited on the rebound pros to come in.

 

[bFWEAD]

Tinted Front Windows to be same as the rears. Now our Bronco windows match our Mach-E windows.

Tint = Llumar CTX15

 

[Sassy BD]

KOH22

 

[mds5917]

Added my Warn VR winch using the RC hidden tray and then remote mounted the control unit onto the KR Off-road mounting plate where I have my ARB single compressor. Working with a welder this week to mod my BL factory skid for the fairlead.

 

[Roger123]

Realized I messed up a bit on my rear cargo area platform.............

 

[DETT]

Got my fog lights installed finally! Morimoto 4Bangers - bright as hell! Need to fine tune the adjustments but I'm happy already.

 

[zedster]

Got my fog lights installed finally! Morimoto 4Bangers - bright as hell! Need to fine tune the adjustments but I'm happy already.

Any pics of them not in the dark?

 

[DETT]

Any pics of them not in the dark?

Tomorrow I'll get some daylight pics. Finished up just as the sun was setting today

 

[Corsair]

Took my Badsquatch to Knoxville ohv in NorCal. Mostly pretty easy except for one downhill that had 25degree slope with lots of loose rock that transitioned to some pretty serious ruts. Had my buddy who was along in his 94 Bronco stand on my bumper to steady it up when I got tippy. Was stressful, but a lot of fun.

Video does not do the descent Justice.

 

[Elevator Man]

I did this.

 

[flip]

Went over a bunch of nuts/ bolts to see if anything was amiss. Yesterday was the first day of decent weather since we picked her up.

All body gaps were good, fuse box bolts were a tiny bit loose but everything else looked great.

Is there a decent place to research Ford parts on-line? My firewall accessory grommet was missing and I'd like to have the P/N handy when O swing by the dealer next week.

Approx how big is the hole? Microcat shows some plugs in that area but the descriptions don't match up with what that looks like.

 

[Roll Sound]

I learned a Wildtrak easily fits in the Van Ness garage.

Sponsored